Thermacut T-11841 105A shield for hand torches replaces Hypertherm 220992

This part replaces Hypertherm 220992-UR. It's Thermacut T-11841, a 105A shield for Hypertherm Duramax hand torches on the Powermax 105. Sold each.

Parts that go with it

At 105A, the shield, retaining cap and nozzle must be used together as a set. The electrode and swirl ring are always used together as a set.

Setup	Retaining cap	Nozzle	Swirl ring
Shielded cutting, 105A	Retaining Cap 105A T-11422 Ohmic Retaining Cap 105A T-11932	220990 Nozzle 105A T-11840	220994 Swirl Ring 105A T-11930

This setup uses 220842 Electrode 45–105A T-11883 (5 electrodes plus a swirl ring spring holder).

Buy it in a kit

This shield also comes in this kit, with the other parts it's used with.

105A Hand Torch Kit T-DMXKIT105H

1 × Shield for Hand Torch 105A, 1 × Retaining Cap 105A, 10 × Nozzle 105A, 1 × Swirl Ring 105A, 5 × Electrode

View the 105A hand torch kit

Choose your amperage and torch in our Powermax consumables guide to get the full set for this part.

Open the Powermax consumables guide

Common questions about the T-11841 shield

Does T-11841 replace Hypertherm 220992?

Yes. T-11841 is the Thermacut replacement for Hypertherm 220992-UR, the 105A shield for Duramax hand torches.

Which shield do I need?

It depends on your torch, amperage and job. For cutting at 45, 65 and 85A, use 220818 Shield for Hand Torch 45/65/85A T-11406 on a hand torch or 220817 Shield for Machine Torch 45/65/85A T-11404 on a machine torch. At 105A, use this shield on a hand torch or 220993 Shield for Machine Torch 105A T-11842 on a machine torch. For gouging, use 220798 Gouging Shield 65/85/105A T-12022, and for FineCut on an ohmic table, 220948 FineCut Ohmic Shield 45A T-12014.

Which Powermax machines does this shield fit?

It fits the Powermax 105 with a Duramax hand torch. It's a 105A part, so it isn't for the Powermax 65 or 85. It doesn't suit Powermax SYNC systems (they use one-piece cartridges), the original Powermax45 or the Powermax30.

Alternative SKU: 220992
Alternative SKU: 220992-UR

Part Number/SKU: T-11841

* Product Images are for illustration purposes only, unless otherwise specified colour may be different.

Thermacut T-11841, 105A shield for hand torches
Replaces Hypertherm 220992-UR
Sold each
For Duramax hand torches on the Powermax 105

Part number (SKU)	T-11841
Replaces Hypertherm	220992-UR
Brand	Thermacut
Part type	Shield for Hand Torch 105A
Standard pack	1
Torch	Hypertherm Duramax hand torches
Systems	Hypertherm Powermax 105
Kits	T-DMXKIT105H

SKU	T-11841
Brand	THERMACUT
Shipping Weight	0.20kg
Shipping Width	0.150m
Shipping Height	0.150m
Shipping Length	0.150m
Shipping Cubic	0.003375000m3
Unit Of Measure	ea

Be The First To Review This Product!

Help other National Welding and Industrial Supplies users shop smarter by writing reviews for products you have purchased.

Write a product review

Description