Thermacut T-11931 ohmic retaining cap replaces Hypertherm 220953

This part replaces Hypertherm 220953-UR. It's Thermacut T-11931, and it suits Hypertherm Duramax hand and machine torches on Powermax 65, 85 and 105 cutting tables with ohmic sensing, at up to 85A. Sold each.

Parts that go with it

The shield and nozzle must be used together as a set, and so must the electrode and swirl ring.

Both setups use electrode 220842 Electrode 45–105A T-11883 (5 electrodes plus a swirl ring spring holder). Nozzles come in packs of 5.

Choose your amperage and torch in our Powermax consumables guide to get the full set for ohmic cutting.

Open the Powermax consumables guide

Common questions about the T-11931 ohmic cap

Does T-11931 replace Hypertherm 220953?
Yes. T-11931 is the Thermacut replacement for Hypertherm 220953-UR, the ohmic retaining cap for Duramax torches at 45, 65 and 85A.
Which retaining cap do I need?
It depends on your amperage and whether your table uses ohmic sensing. Up to 85A, use 220854 Retaining Cap 45/65/85A T-11423, or this cap for ohmic sensing. At 105A, use Retaining Cap 105A T-11422, or Ohmic Retaining Cap 105A T-11932 for ohmic sensing. If a wire from your table's height control clips onto the cap, you need an ohmic cap.
Which Powermax machines does this retaining cap fit?
It fits the Powermax 65, 85 and 105 on cutting tables with ohmic sensing, up to 85A. It doesn't suit Powermax SYNC systems (they use one-piece cartridges), the original Powermax45 or the Powermax30.
What does ohmic mean on a retaining cap?
Ohmic means the cap connects to your CNC table's plate sensing. The height control's sensing wire clips onto the cap, and the table uses the electrical contact between torch and plate to find the surface before each pierce.
Alternative SKU: 220953
Alternative SKU: 220953-UR

Part Number/SKU: T-11931

* Product Images are for illustration purposes only, unless otherwise specified colour may be different.

  • Thermacut T-11931 retaining cap, 45/65/85A, ohmic
  • Replaces Hypertherm 220953-UR
  • Sold each
  • For 45/65/85A shielded and FineCut setups on Duramax torches, Powermax 65, 85 and 105
  • Rated up to 85A. The 105A ohmic cap is T-11932
  • Standard version without ohmic sensing: T-11423
Part number (SKU) T-11931
Replaces Hypertherm 220953-UR
Brand Thermacut
Part type Retaining cap, ohmic
Amperage 45/65/85A (up to 85A)
Standard pack 1
Torch Hypertherm Duramax hand and machine torch
Systems Hypertherm Powermax 65, 85, 105
Shielded setup Shield T-11406 or T-11404, nozzle T-11378, T-11377 or T-11405
FineCut setup Shield T-12014, nozzle T-11845
Standard (non-ohmic) version T-11423
105A ohmic version T-11932
SKU T-11931
Barcode # 00662310312725
Brand THERMACUT
Shipping Weight 0.25kg
Shipping Width 0.200m
Shipping Height 0.200m
Shipping Length 0.200m
Shipping Cubic 0.008000000m3
Unit Of Measure ea

Be The First To Review This Product!

Help other National Welding and Industrial Supplies users shop smarter by writing reviews for products you have purchased.

Write a product review


Thermacut T-11931 ohmic retaining cap replaces Hypertherm 220953

This part replaces Hypertherm 220953-UR. It's Thermacut T-11931, and it suits Hypertherm Duramax hand and machine torches on Powermax 65, 85 and 105 cutting tables with ohmic sensing, at up to 85A. Sold each.

Parts that go with it

The shield and nozzle must be used together as a set, and so must the electrode and swirl ring.

Both setups use electrode 220842 Electrode 45–105A T-11883 (5 electrodes plus a swirl ring spring holder). Nozzles come in packs of 5.

Choose your amperage and torch in our Powermax consumables guide to get the full set for ohmic cutting.

Open the Powermax consumables guide

Common questions about the T-11931 ohmic cap

Does T-11931 replace Hypertherm 220953?
Yes. T-11931 is the Thermacut replacement for Hypertherm 220953-UR, the ohmic retaining cap for Duramax torches at 45, 65 and 85A.
Which retaining cap do I need?
It depends on your amperage and whether your table uses ohmic sensing. Up to 85A, use 220854 Retaining Cap 45/65/85A T-11423, or this cap for ohmic sensing. At 105A, use Retaining Cap 105A T-11422, or Ohmic Retaining Cap 105A T-11932 for ohmic sensing. If a wire from your table's height control clips onto the cap, you need an ohmic cap.
Which Powermax machines does this retaining cap fit?
It fits the Powermax 65, 85 and 105 on cutting tables with ohmic sensing, up to 85A. It doesn't suit Powermax SYNC systems (they use one-piece cartridges), the original Powermax45 or the Powermax30.
What does ohmic mean on a retaining cap?
Ohmic means the cap connects to your CNC table's plate sensing. The height control's sensing wire clips onto the cap, and the table uses the electrical contact between torch and plate to find the surface before each pierce.
  • Thermacut T-11931 retaining cap, 45/65/85A, ohmic
  • Replaces Hypertherm 220953-UR
  • Sold each
  • For 45/65/85A shielded and FineCut setups on Duramax torches, Powermax 65, 85 and 105
  • Rated up to 85A. The 105A ohmic cap is T-11932
  • Standard version without ohmic sensing: T-11423
Part number (SKU) T-11931
Replaces Hypertherm 220953-UR
Brand Thermacut
Part type Retaining cap, ohmic
Amperage 45/65/85A (up to 85A)
Standard pack 1
Torch Hypertherm Duramax hand and machine torch
Systems Hypertherm Powermax 65, 85, 105
Shielded setup Shield T-11406 or T-11404, nozzle T-11378, T-11377 or T-11405
FineCut setup Shield T-12014, nozzle T-11845
Standard (non-ohmic) version T-11423
105A ohmic version T-11932
SKU T-11931
Barcode # 00662310312725
Brand THERMACUT
Shipping Weight 0.25kg
Shipping Width 0.200m
Shipping Height 0.200m
Shipping Length 0.200m
Shipping Cubic 0.008000000m3
Unit Of Measure ea

Be The First To Review This Product!

Help other National Welding and Industrial Supplies users shop smarter by writing reviews for products you have purchased.

Write a product review