Liquid Chisel Concrete Dissolver 200L

DESCRIPTION:

Chemtools® Liquid Chisel LC101 Concrete & Mortar Remover is an odorless and fast-acting* easy-to-use formula designed to turn concrete, mortar, lime, and grout into a soft paste for effortless removal. It is non-corrosive and non-flammable and can be used on most surfaces, including steel, aluminum, fiberglass and glass, plastic, rubber, painted surfaces, wood, and more - including tools and equipment.
LC101 is 100% biodegradable, extremely safe, and cost-effective, and contains no hydrofluoric, sulfuric, muriatic, or phosphoric acids.

RECOMMENDED FOR THE GENERAL CLEANING OF:

• Trucks
• Trailers
• Scaffolds
• Formwork
• Generators
• Saws
• Drills
• Pumps
• Screeds
• Concrete Mixers
• Trowels
• Shovels
• Mudboards & Tubs
• Wheelbarrows

APPLICATION:

1. Using a foaming spray gun, or Chemtools® Foaming Pump Sprayer (Part No. CT-FSPR-1.5L), apply an initial coat of LC101 to hardened concrete/mortar/lime/grout, ensuring all exposed surfaces are soaked.
   IMPORTANT: Do not wet the area with water before application as this will reduce the effectiveness of the product.
   A note on color changes: The affected area will change color as the product soaks in – for example, concrete will turn white upon initial contact but will eventually become grey as the softening/dissolving process occurs.
2.  Allow LC101 to penetrate the affected area for a minimum of 15 minutes – the longer it is left to soak, the easier the cleaning process will be.
   IMPORTANT: Do not let the concrete/mortar/lime/grout dry before removal.
3. After the minimum soaking time has passed, begin the safe removal of the softening sludge by scrubbing the surface using a stiff nylon brush and a bucket of water to loosen and break up dissolved deposits.
   Note: During the softening process, the affected area will look rough and spongy and will start to pull away from the underlying surface.
4. Using a trowel, hose, or pressure washer, clean the dissolved residue from the surface.
   Note: On areas of thick concrete, a second application may be required.

DILUTION RATIOS:

Note: This is a guide only.
LC101 is a concentrate and can be applied at full strength or diluted up to 1:3 with water. Dilution ratios depend on the age and type of concrete to be removed. The more concentrated the product is, the quicker it will work.

Part Number/SKU: CT-LC101-200L

* Product Images are for illustration purposes only, unless otherwise specified colour may be different.