Carbide Burr Cylindrical Radius Aluminium WRC 1/4" Shank 3/8" x 3/4" SC-3 ALU Pferd 21724425

DESCRIPTION:

Pferd tools has further developed the ALU cut especially for stock removal on aluminium. This cut is characterized by its high stock removal rate. Cylindrical burr with radius end according to DIN 8032. Combination of cylindrical and ball-shaped geometries.

FEATURES:

• Extremely high stock removal rate.
• Large chips.
• Reduced material adhesion.
• Long tool life and smooth running.
• Can be used with cutting speeds of up to 1100m/min.
• The highly accurate concentricity enables impact-free working without creating chatter marks. This considerably reduces wear on the tool and tool drive.

RECOMMENDATIONS FOR USE:

• To prevent vibrations, place the tools on powerful drives with an elastically supported spindle wherever possible.
• Observe the recommended rotational speeds.
• To ensure cost-effective use of burrs, use a higher rotational speed and cutting speed. Use burrs with a shank diameter of 6.35mm with drives with a power output from 300 watts.

MATERIALS THAT CAN BE WORKED:

• Aluminium
• Brass
• Bronze
• Copper
• Fibre-reinforced thermosetting plastics (GRP, CRP)
• Hard aluminium alloys
• Hard non-ferrous metal
• Plastics
• Soft aluminium alloys
• Soft non-ferrous metal
• Thermoplastics
• Tough aluminium alloys
• Zinc

APPLICATIONS:

• Cutting out holes
• Deburring
• Leveling
• Miling
• Miling out
• Surface work

DRIVE TYPES:

• Automated centres
• Flexible shaft drive
• Straight grinder
• Tool machine

SPECIFICATIONS:

Part Number/SKU: 21724425

* Product Images are for illustration purposes only, unless otherwise specified colour may be different.