Plasma Cutter 120 Razor Cut Unimig U14002K 

The RAZOR™ CUT 120 is designed for maximum performance, offering the highest level of cutting performance from UNIMIG’s range. Capable of clean cutting 45mm and severing 60mm, this machine is for the professional needing maximum power from a portable machine.

PILOT ARC START
Pilot Arc Start lets you start the arc before contacting the work piece. This gives you better control of the torch, especially on materials with uneven or curved surfaces.

 

 

THREE PHASE - 415V POWER

45mm CLEAN CUT - MILD STEEL.

PILOT ARC START - START CUT WITHOUT DIRECT CONTACT.

2T/4T TORCH CONTROLS - MORE COMFORT WHEN CUTTING.

Package Contents 

• RAZOR™ CUT 120 Plasma Cutter
• 6m SC120 Plasma Torch
• 4m 300 AMP Earth Clamp
• Air Regulator
• Operating Manual

SPECIFICATIONS 

PRIMARY INPUT VOLTAGE	415V Three Phase
SUPPLY PLUG No plug supplied	(32 AMP Recommended)
Ieff (A)	26.0
NO LOAD VOLTAGE (V)	420
PROTECTION CLASS	IP21
INSULATION CLASS	F
DINSE CONNECTOR	10/25
STANDARD	AS/NZ60974-1
WARRANTY (Years)	B

 

PLASMA SPECIFICATIONS 

PLASMA CUT CURRENT RANGE	20-120A
PLASMA CUT DUTY CYCLE @ 40°C	60% @ 120A, 100% @ 100A
MILD STEEL CUT THICKNESS	45mm
MILD STEEL SEVERANCE THICKNESS	60mm
ALUMINIUM CUT THICKNESS	36mm
STAINLESS STEEL CUT THICKNESS	45mm
AIR FLOW DRAW OFF (L/min)	189
AIR FLOW PRESSURE (Bar)	5.17 (75 psi)
PLASMA ARC START	Pilot Arc

*Please note warranty only applies to the power source only

https://www.nationalwelding.com.au/assets/files/RAZOR-CUT-120-Info-Sheet-JAN21.pdf

Plasma Torch and Consumables Info https://www.nationalwelding.com.au/assets/files/SC120-Torch-Breakdown%20(1).pdf

 

Part Number/SKU: U14002K

* Product Images are for illustration purposes only, unless otherwise specified colour may be different.