Universal Metal Protector Soft Cote UMP 300g Molytec M910

Molytec UMP is a universal metal protector - soft cote. It provides a premium heavy-duty waxy film for long term protection. Seals from moisture and corrosive contaminants. Highly Resistant to chemicals, salt water, humidity and corrosive environments. Easily washes off, can be removed with Brake & Parts Cleaner (see pg. 7) Will not effect painted surfaces, rubbers, plastics and insulation materials. Temp range -20c to +100c. 

Molytec UMP provides a dry transparent, heavy duty waxy film for protection of parts.

Features and Benefits 

 

• “When the Molytec UMP is applied on metal surfaces, the waxy film protect the components from adverse conditions such as salts spray, corrosive atmosphere and chemicals.
• Applying just 1 layer of UMP can provide up to 2 years protection.

Highly Resistant to

•  Chemicals
• Salt Water
•  Humidity
•  Wash Off
•  Corrosive Environments

Specification and Approvals
Performance Characteristics

•  Type of Film Waxy, dry film
•  Viscosity (20oC) 0.87 + 0.05
•  Film Thickness 0.5 – 2ml dry
•  Drying time Approx. 1 hour to touch
•  Coverage (25 Micron) 20 square metres/1 Litre
•  Corrosion Resistance Up to 1 year outdoors / 2yrs indoors

Directions

•  Shake can well before use.
•  Mask area not to be sprayed.
•  Best results are obtained when sprayed above 150C. Spray from a distance of 30 to 35cm in light, even coats.
• Additional coats for added protection may be applied after each coat dries.
•  When finished spraying, clean valve by turning can upside down and pressing actuator until only propellant escapes.
• Do not use on energised equipment.
•  Remove with aliphatic petroleum solvents or mineral spirits.

Disposal

• Disposal requirements vary by state and local regulations. All used and unused product should be disposed of in conformance with local, state and
• commonwealth laws and regulations.

Special Use Warnings
Aerosol Cans
Do not puncture, incinerate or store above 500C. Exposure to high temperatures may cause can to burst. Do not place in direct sunlight or near
any heat source. Aerosol cans will conduct electricity. Keep away from all live electrical sources including battery terminals, solenoids, electrical
panels and other electronic components. Failure to observe this warning may result in serious injury from flash fire and/or electric shock.
General
Use only in well ventilated area. Ventilation may be improved by opening a window or door or providing mechanical assistance. Avoid
continuous breathing of vapour and spray mist. Avoid contact with skin and eyes. If ventilation is not adequate, respiratory protection should
be worn.

For more information regarding short term and long term exposure, review this product’s Material Safety Data Sheet.

 

Part Number/SKU: M910

* Product Images are for illustration purposes only, unless otherwise specified colour may be different.