Contact Cleaner Non-Flammable 400g Aerosol

DESCRIPTION:

Chemtools® Kleanium™ Non-Flammable Contact Cleaner reliably removes contamination such as dust, fluxes, oils, greases, and silicones from sensitive electrical and electronic equipment, drying extremely quickly and leaving no residue. It is stable, non-corrosive, and non-conductive, and restores electrical conductivity, preventing increased temperatures at points of contact.
Non-Flammable Contact Cleaner is a powerful, fast-acting, non-ozone-depleting cleaner that is safe on most plastics (excludes delicate plastics, refer to compatibility chart below), metals, electrical connections, and electronics, including contacts, printed circuit boards, bus bars, relays, scales, sensors, motors, and more.

PLASTIC AND ELASTOMER COMPATIBILITY:

MATERIAL TYPE COMPATIBILITY          
ABS Not acceptable
Acrylic Not acceptable
Delrin Acceptable
HDPE Acceptable
Nylon Acceptable
Polystyrene Not acceptable
Polyvinyl Chloride Acceptable
Teflon Acceptable
Butadiene Nitrile Acceptable
Natural Rubber Not acceptable
Viton Acceptable
Perfluoroelastomer Acceptable
Neoprene Not acceptable

TECHNICAL SPECIFICATION:

  • Appearance Clear Liquid: Odour Slight hydrocarbon odour
  • Boiling Point:   68 Deg. 
  • Kauri Butanol Number:  129
  • Flash Point (ASTM D93):   None
  • Specific Gravity @ 25oC:   1.34
  • Evaporation Rate (n-butyl acetate = 1):  4.5
  • Vapour Pressure @ 20oC:   14.6 kPa
  • Flammability Limits (vol %):   4.6 – 8.5
  • Viscosity @25 oC:   0.49 cp
  • Flammability:  Not flammable
  • Dielectric Strength:   36.2 kV

FIRST AID AND SAFETY  PRECAUTIONS:

Please refer to the Safety Data Sheet (SDS) before use. Use with adequate ventilation and avoid breathing fumes. Avoid contact with eyes and skin. This product may produce adverse health conditions, ranging from minor skin irritation to serious systemic effects. It should not be used, stored, or transported until the handling precautions and recommendations as stated in the Safety Data Sheet (SDS) for this product have been fully understood by all persons who will work with the material.

STORAGE:

Keep out of reach of children. Keep the container tightly closed. Protect from sunlight. Do not expose to temperatures exceeding 50°C/122°F. Containers must be secured and stored upright during transit.


Part Number/SKU: CT-CCNF-400

* Product Images are for illustration purposes only, unless otherwise specified colour may be different.

SKU CT-CCNF-400
Barcode # 9.34211E+12
Brand Chemtools
Unit Of Measure ea

Be The First To Review This Product!

Help other National Welding and Industrial Supplies users shop smarter by writing reviews for products you have purchased.

Write a product review


Contact Cleaner Non-Flammable 400g Aerosol

DESCRIPTION:

Chemtools® Kleanium™ Non-Flammable Contact Cleaner reliably removes contamination such as dust, fluxes, oils, greases, and silicones from sensitive electrical and electronic equipment, drying extremely quickly and leaving no residue. It is stable, non-corrosive, and non-conductive, and restores electrical conductivity, preventing increased temperatures at points of contact.
Non-Flammable Contact Cleaner is a powerful, fast-acting, non-ozone-depleting cleaner that is safe on most plastics (excludes delicate plastics, refer to compatibility chart below), metals, electrical connections, and electronics, including contacts, printed circuit boards, bus bars, relays, scales, sensors, motors, and more.

PLASTIC AND ELASTOMER COMPATIBILITY:

MATERIAL TYPE COMPATIBILITY          
ABS Not acceptable
Acrylic Not acceptable
Delrin Acceptable
HDPE Acceptable
Nylon Acceptable
Polystyrene Not acceptable
Polyvinyl Chloride Acceptable
Teflon Acceptable
Butadiene Nitrile Acceptable
Natural Rubber Not acceptable
Viton Acceptable
Perfluoroelastomer Acceptable
Neoprene Not acceptable

TECHNICAL SPECIFICATION:

  • Appearance Clear Liquid: Odour Slight hydrocarbon odour
  • Boiling Point:   68 Deg. 
  • Kauri Butanol Number:  129
  • Flash Point (ASTM D93):   None
  • Specific Gravity @ 25oC:   1.34
  • Evaporation Rate (n-butyl acetate = 1):  4.5
  • Vapour Pressure @ 20oC:   14.6 kPa
  • Flammability Limits (vol %):   4.6 – 8.5
  • Viscosity @25 oC:   0.49 cp
  • Flammability:  Not flammable
  • Dielectric Strength:   36.2 kV

FIRST AID AND SAFETY  PRECAUTIONS:

Please refer to the Safety Data Sheet (SDS) before use. Use with adequate ventilation and avoid breathing fumes. Avoid contact with eyes and skin. This product may produce adverse health conditions, ranging from minor skin irritation to serious systemic effects. It should not be used, stored, or transported until the handling precautions and recommendations as stated in the Safety Data Sheet (SDS) for this product have been fully understood by all persons who will work with the material.

STORAGE:

Keep out of reach of children. Keep the container tightly closed. Protect from sunlight. Do not expose to temperatures exceeding 50°C/122°F. Containers must be secured and stored upright during transit.

SKU CT-CCNF-400
Barcode # 9.34211E+12
Brand Chemtools
Unit Of Measure ea

Be The First To Review This Product!

Help other National Welding and Industrial Supplies users shop smarter by writing reviews for products you have purchased.

Write a product review