6mm Sham mounted 20mm Brass Wire Crimped End Brush Pferd 43202002

DESCRIPTION:

Suitable for light brushing such as deburring, cleaning and derusting. With PFERD TOOLS special wire, characterized by high bending fatigue strength. Brushes with brass wire filament material are suitable for particular applications such as surface finishing on workpieces made from copper and brass. In comparison to steel wire, brass wire is softer and more flexible. For all brushes with brass wire, PFERD TOOLS uses wire quality CuZn37. Brass wire withstands temperatures up to 180 °C.

FEATURES:

• Optimal access to hard-to-reach areas such as drilled holes and cavities as the filament spreads out upon rotation.
• Non-sparking.
• Creates fine surfaces.

RECOMMENDATIONS FOR USE:

• Please observe the recommended rotational speeds.
• For the best results, use a tool drive with a minimum output of 300 watts.

SAFETY NOTES:

When clamping the brush, ensure that the shank is clamped as far into the arbor as possible. This applies in particular for use in the high rotational speed range. The minimum clamping length is 10 mm.

MATERAILS THAT CAN BE WORKED:

• Brass
• Copper
• Other non-ferrous metals
• Zinc

APPLICATIONS:

• Cleaning
• Deburring
• Removing oxide layers

DRIVE TYPES:

• Flexible shaft drive
• Power drill
• Straight grinder

SPECIFICATIONS:

Part Number/SKU: 43202002

* Product Images are for illustration purposes only, unless otherwise specified colour may be different.