Magnetic Based Drilling Machine Automatic Feed Atra Ace Nitto WA-5000

Drilling time and cutting performance are enhanced by the automatic feed function. The 
WA-5000 slow start function, load sensor and overload stop assist greatly in the prevention of cutter damage. 
NITTO KOHKI has incorporated a built in motion sensor for fail-safe protection. 
Machine can be used in both automatic and manual modes with the over-load protection still active in the either mode. 
Specifically made for high volume steel fabrication.
 

Features
  • High-performance mechanism & high-tech components
  • Superior 75mm deep hole drilling- automatically cuts holes from 14mm dia. - 50mm dia.
  • Boosts productivity
  • One-touch cutter replacement
  • Powerful two speed drill motor 350/650RPM
  • Built-in lubrication system
  • Built-in motion sensor prevents cutter damage 
  • Supplied in carry case
Standard Accessories

  • Pilot Pin 0625 / 0650 / 0825 / 0850 : 1 pc each.
  • Chain Ass'y : 1 set
  • Chip Breaker : 1 pc.
  • Side Handle Ass'y : 1 set
  • 3mm / 4mm Hex Socket Screw Key : 1 pc.
  • 8mm x 10mm Spanner : 1 pc.
  • Cutting Oil 0.5 litre : 1 can
  • Plastic Case : 1 pc.
  • Gaurd Ass'y : 1 set
Optional Accessories

  • OZBROACH: One-touch type: 25L and 50L
  • JETBROACH: One-touch type: 35L, 50L and 75L
  • Chuck Adaptor TP16233 (Manual mode only)
  • 13mm keyed chuck NPCHUCKJ6
Hole-Cutting Capacity

  • One-touch type JETBROACH: 
    * Hole Dia.: Max. 50mm - Plate Thickness Max. 75mm
  • One-touch type OZBROACH: 
    * Hole Dia.: Max. 50mm - Plate Thickness Max. 50mm

Specifications 

Model WA-5000
Power Source (Single Phase) 220~240V AC 50/60Hz
Rated Power Consumption 1,150W
Rated Current 5.4A
No Load Speed 350 / 650RPM
Magnetic Power Consumption 75W
Magnetic Holding Power 1,000 kgf
Magnetic Dimension 101mm x 201mm
Mass (Weight) 23kg

 

Alternative SKU: Model: #WA-5000 Atra Ace Product ID: #269

Part Number/SKU: WA-5000

* Product Images are for illustration purposes only, unless otherwise specified colour may be different.

SKU WA-5000
Brand Nitto
Shipping Weight 23.0000kg
Shipping Width 0.600m
Shipping Height 0.450m
Shipping Length 0.300m
Shipping Cubic 0.081000000m3
Unit Of Measure ea

Be The First To Review This Product!

Help other National Welding and Industrial Supplies users shop smarter by writing reviews for products you have purchased.

Write a product review


Magnetic Based Drilling Machine Automatic Feed Atra Ace Nitto WA-5000

Drilling time and cutting performance are enhanced by the automatic feed function. The 
WA-5000 slow start function, load sensor and overload stop assist greatly in the prevention of cutter damage. 
NITTO KOHKI has incorporated a built in motion sensor for fail-safe protection. 
Machine can be used in both automatic and manual modes with the over-load protection still active in the either mode. 
Specifically made for high volume steel fabrication.
 

Features
  • High-performance mechanism & high-tech components
  • Superior 75mm deep hole drilling- automatically cuts holes from 14mm dia. - 50mm dia.
  • Boosts productivity
  • One-touch cutter replacement
  • Powerful two speed drill motor 350/650RPM
  • Built-in lubrication system
  • Built-in motion sensor prevents cutter damage 
  • Supplied in carry case
Standard Accessories

  • Pilot Pin 0625 / 0650 / 0825 / 0850 : 1 pc each.
  • Chain Ass'y : 1 set
  • Chip Breaker : 1 pc.
  • Side Handle Ass'y : 1 set
  • 3mm / 4mm Hex Socket Screw Key : 1 pc.
  • 8mm x 10mm Spanner : 1 pc.
  • Cutting Oil 0.5 litre : 1 can
  • Plastic Case : 1 pc.
  • Gaurd Ass'y : 1 set
Optional Accessories

  • OZBROACH: One-touch type: 25L and 50L
  • JETBROACH: One-touch type: 35L, 50L and 75L
  • Chuck Adaptor TP16233 (Manual mode only)
  • 13mm keyed chuck NPCHUCKJ6
Hole-Cutting Capacity

  • One-touch type JETBROACH: 
    * Hole Dia.: Max. 50mm - Plate Thickness Max. 75mm
  • One-touch type OZBROACH: 
    * Hole Dia.: Max. 50mm - Plate Thickness Max. 50mm

Specifications 

Model WA-5000
Power Source (Single Phase) 220~240V AC 50/60Hz
Rated Power Consumption 1,150W
Rated Current 5.4A
No Load Speed 350 / 650RPM
Magnetic Power Consumption 75W
Magnetic Holding Power 1,000 kgf
Magnetic Dimension 101mm x 201mm
Mass (Weight) 23kg

 

SKU WA-5000
Brand Nitto
Shipping Weight 23.0000kg
Shipping Width 0.600m
Shipping Height 0.450m
Shipping Length 0.300m
Shipping Cubic 0.081000000m3
Unit Of Measure ea

Be The First To Review This Product!

Help other National Welding and Industrial Supplies users shop smarter by writing reviews for products you have purchased.

Write a product review