S-Weld Brite Wash 5L Callington 1205-42

DESCRIPTION:

Callington S-Weld Brite Wash is an acidic, biodegradable detergent designed for surface cleaning for stainless steel & carbon steel after fabrication. It is also suitable for in-situ cleaning of architectural stainless steel surfaces. S-Weld Brite Wash removes surface dust, soil, rust, water stains, iron, and organic contamination without affecting the surface finish of the stainless steel. It can also be used to remove surface corrosion and staining on handrails and other stainless steel surfaces. It is excellent for cleaning machined carbon steel parts.

FEATURES:

  • Readily miscible with water
  • Leaves no residue
  • Promotes surface passivation
  • Aids surface passivation – improves surface life
  • Wide dilution rate – gives a variety of uses

DIRECTION FOR USE:

  •  General Surface Cleaning After Fabrication: Mix 1 part of S-Weld Brite Wash with 5 to 8 parts of water at room temperature. Spray onto the surface with acid resistant spray pump. Some brushing of the surface will assist with the removal of corrosion and difficult soils. The surface should be kept wet with the solution until the soil is gone. Rinse the surface; warm water is preferred.
  •  Corrosion Removal: Where the surface of handrails, stainless steel cladding or process plant, and carbon steel equipment shows visible signs of corrosion (rusting).

APPLICATIONS:

  • Hand Wipe Application: Mix 1 part of S-Weld Brite Wash with 1 part of clean water. Wet the surface with a sponge or rag and follow immediately by scrubbing with a stainless steel Scotch Brite-type pad. Rinse with clean water once all traces of corrosion are removed.
  • Spray Application: Mix one part of S-Weld Brite Wash with 1 to 2 parts of clean water. Spray onto the surface with an acid-resistant spray pump. Where appropriate, scrub the surface with a Scotch Brite pad. For hard-to-use areas, use a high-pressure spray containing a 10% solution of S-Weld Brite Wash. Rinse thoroughly with clean water when all visible traces of corrosion have been removed.

PHYSICAL PROPERTIES:

  • Specific Gravity: 1.35
  • Appearance: Colour Water White

DANGER:

May be corrosive to metal. Harmful if swallowed. Causes severe skin burns and eye damage. Toxic to aquatic life with long-lasting effects.

PRECAUTIONS:

Do not breathe dust/fumes/gas/mist/vapors/spray. Wear protective gloves/protective clothing/eye protection/face protection. Keep only in the original container. Do not eat, drink, or smoke when using this product. Avoid release to the environment.
FIRST AID:

IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present, and easy to do. Continue rinsing. Immediately call a POISON CENTER or doctor/physician. Wash contaminated clothing before reuse. Absorb spillage to prevent material damage. IF INHALED: Remove the victim to fresh air and keep at rest in a position comfortable for breathing.
STORAGE & DISPOSAL:

Store locked up. Dispose of contents/containers by local regulations.


Part Number/SKU: 1205-42

* Product Images are for illustration purposes only, unless otherwise specified colour may be different.

SKU 1205-42
Brand Callington
Shipping Weight 5.5000kg
Shipping Width 0.350m
Shipping Height 0.350m
Shipping Length 0.350m
Shipping Cubic 0.042875000m3
Unit Of Measure ea

Be The First To Review This Product!

Help other National Welding and Industrial Supplies users shop smarter by writing reviews for products you have purchased.

Write a product review


S-Weld Brite Wash 5L Callington 1205-42

DESCRIPTION:

Callington S-Weld Brite Wash is an acidic, biodegradable detergent designed for surface cleaning for stainless steel & carbon steel after fabrication. It is also suitable for in-situ cleaning of architectural stainless steel surfaces. S-Weld Brite Wash removes surface dust, soil, rust, water stains, iron, and organic contamination without affecting the surface finish of the stainless steel. It can also be used to remove surface corrosion and staining on handrails and other stainless steel surfaces. It is excellent for cleaning machined carbon steel parts.

FEATURES:

  • Readily miscible with water
  • Leaves no residue
  • Promotes surface passivation
  • Aids surface passivation – improves surface life
  • Wide dilution rate – gives a variety of uses

DIRECTION FOR USE:

  •  General Surface Cleaning After Fabrication: Mix 1 part of S-Weld Brite Wash with 5 to 8 parts of water at room temperature. Spray onto the surface with acid resistant spray pump. Some brushing of the surface will assist with the removal of corrosion and difficult soils. The surface should be kept wet with the solution until the soil is gone. Rinse the surface; warm water is preferred.
  •  Corrosion Removal: Where the surface of handrails, stainless steel cladding or process plant, and carbon steel equipment shows visible signs of corrosion (rusting).

APPLICATIONS:

  • Hand Wipe Application: Mix 1 part of S-Weld Brite Wash with 1 part of clean water. Wet the surface with a sponge or rag and follow immediately by scrubbing with a stainless steel Scotch Brite-type pad. Rinse with clean water once all traces of corrosion are removed.
  • Spray Application: Mix one part of S-Weld Brite Wash with 1 to 2 parts of clean water. Spray onto the surface with an acid-resistant spray pump. Where appropriate, scrub the surface with a Scotch Brite pad. For hard-to-use areas, use a high-pressure spray containing a 10% solution of S-Weld Brite Wash. Rinse thoroughly with clean water when all visible traces of corrosion have been removed.

PHYSICAL PROPERTIES:

  • Specific Gravity: 1.35
  • Appearance: Colour Water White

DANGER:

May be corrosive to metal. Harmful if swallowed. Causes severe skin burns and eye damage. Toxic to aquatic life with long-lasting effects.

PRECAUTIONS:

Do not breathe dust/fumes/gas/mist/vapors/spray. Wear protective gloves/protective clothing/eye protection/face protection. Keep only in the original container. Do not eat, drink, or smoke when using this product. Avoid release to the environment.
FIRST AID:

IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present, and easy to do. Continue rinsing. Immediately call a POISON CENTER or doctor/physician. Wash contaminated clothing before reuse. Absorb spillage to prevent material damage. IF INHALED: Remove the victim to fresh air and keep at rest in a position comfortable for breathing.
STORAGE & DISPOSAL:

Store locked up. Dispose of contents/containers by local regulations.

SKU 1205-42
Brand Callington
Shipping Weight 5.5000kg
Shipping Width 0.350m
Shipping Height 0.350m
Shipping Length 0.350m
Shipping Cubic 0.042875000m3
Unit Of Measure ea

Be The First To Review This Product!

Help other National Welding and Industrial Supplies users shop smarter by writing reviews for products you have purchased.

Write a product review