BM25 Portable Beveller Max Bevel Width 25mm 240V Motor ITM WA-BM25

FEATURES

• The BM25 is an easy to use, portable heavy-duty machine designed for bevelling steel plates prior to welding. The beveller is equipped with powerful motor and fitted with face milling bevelling head, allowing smooth operation and exceptional efficiency.
• BM25 enables milling straight edges up to 25mm bevel width, whereas variable spindle speed facilitates optimizing cutting conditions. Continuously adjustable milling depth and bevel angle between 0° and 90° require no tooling to change. BM25 has got a state-of-the-art electronic motor overload module protecting the operator, the machine and the tooling.
• The beveller is equipped with guide rollers, which make it easy and light to operate.
• Comfort and ergonomics of work
• Continuously adjustable bevel angle between 0 and 90 degrees
• Single head operates with face milling method
• Maximum 25mm bevel width (more than one pass could be required)
• Continuous bevel width adjustment
• Powerful electric motor
• Milling head is equipped with 5 pcs of 2-sided indexable cutting inserts
• Electronic speed control between 1800-5850 rpm
• Overload protection

SPECIFICATIONS

• Voltage: 1~ 220 - 240 V, 50 - 60 Hz
• Power: 2200W
• Spindle Speed (Without Load): 1800 - 5850rpm
• Maximum Bevel Width (b, Fig. 1): 25mm (1")
• Maximum Depth Of Cut (d, Fig. 1): 12.5mm (1/2")
• Bevel Angle (B, Fig. 1): 0° - 90°, 15° - 75° (Recommended)
• Minimum Workpiece Thickness: 2mm
• Weight: 12.5kg

Comfort And Ergonomics Of Work:

• Each user can individually adjust the position of the grip and handle
• Grip can be rotated through 360 degrees
• Adjustable grip and handle enable comfort of work for both right and left-handers and operators of different heights
• The handle can be tilted to the desired angle
• Guide set with rollers can be rotated through 360 degrees
• 2 possible positions of rollers (wide and narrow)

Continuously Adjustable Bevel Angle Between 0° And 90°:

• One milling head for full range of angles
• No need for separate milling heads for specific angles
• Recommended bevel angle from 15 to 75 degrees

Bevel Width Up To 25mm At 45°:

• Various bevel widths are possible by means of the WA-BM25
• The final results depend on combination of bevel angle and bevel depth

 

Work At 0°:

Facing process to produce a flat surface such as lands / root faces

Work At 90°:

• Cladding and other wear resistant coatings removal
• Lowering of the plate edge height

 

Part Number/SKU: WA-BM25

* Product Images are for illustration purposes only, unless otherwise specified colour may be different.