Anti Spatter Spray 20L Cal Guard

Calguard Anti-Spatter Spray is water based, paintable, cost effective and non-flammable agent for the prevention of weld-spatter adhering to metal surfaces during the welding process.

Calguard Anti-Spatter Spray has outstanding performance preventing spatter sticking to a wide range of steels, including mild steel, stainless, steels and aluminium.

Calguard Anti-Spatter Spray avoids the need for mechanical abrasion or grinding of weld spatter following welding. It contains corrosion inhibitors for base metal protection.

Calguard increases the life of torch components saving time and money. Eliminates spatter build up which results in poor gas flow causing pitting, porosity and burnbacks.

DIRECTIONS FOR USE

Welding Torch Spray Calguard Anti-Spatter Spray before welding in a thin and uniform film onto the areas to be protected. Hold spray can approximately 30 cm from the surface to be protected. Also use the spray to protect the interior and exterior of nozzles, the end and outer surface of contact tips, and all other potential areas which are subject to weld spatter. It may be advisable to spray diffusers and the base of the nozzle support as well. Base Metal Spray Calguard Anti-Spatter Spray hold spray can approximately 30cm from surface to be protected. Spray a thin uniform coating. Do not over apply solution as excessive solution application may be detrimental to the weld quality.

Alternative SKU: 1400/51

Part Number/SKU: Antispatter20L

* Product Images are for illustration purposes only, unless otherwise specified colour may be different.

SKU Antispatter20L
Brand Callington
Shipping Weight 28.0000kg
Shipping Width 0.500m
Shipping Height 0.600m
Shipping Length 0.600m
Shipping Cubic 0.180000000m3
Unit Of Measure ea

Be The First To Review This Product!

Help other National Welding and Industrial Supplies users shop smarter by writing reviews for products you have purchased.

Write a product review


Anti Spatter Spray 20L Cal Guard

Calguard Anti-Spatter Spray is water based, paintable, cost effective and non-flammable agent for the prevention of weld-spatter adhering to metal surfaces during the welding process.

Calguard Anti-Spatter Spray has outstanding performance preventing spatter sticking to a wide range of steels, including mild steel, stainless, steels and aluminium.

Calguard Anti-Spatter Spray avoids the need for mechanical abrasion or grinding of weld spatter following welding. It contains corrosion inhibitors for base metal protection.

Calguard increases the life of torch components saving time and money. Eliminates spatter build up which results in poor gas flow causing pitting, porosity and burnbacks.

DIRECTIONS FOR USE

Welding Torch Spray Calguard Anti-Spatter Spray before welding in a thin and uniform film onto the areas to be protected. Hold spray can approximately 30 cm from the surface to be protected. Also use the spray to protect the interior and exterior of nozzles, the end and outer surface of contact tips, and all other potential areas which are subject to weld spatter. It may be advisable to spray diffusers and the base of the nozzle support as well. Base Metal Spray Calguard Anti-Spatter Spray hold spray can approximately 30cm from surface to be protected. Spray a thin uniform coating. Do not over apply solution as excessive solution application may be detrimental to the weld quality.

SKU Antispatter20L
Brand Callington
Shipping Weight 28.0000kg
Shipping Width 0.500m
Shipping Height 0.600m
Shipping Length 0.600m
Shipping Cubic 0.180000000m3
Unit Of Measure ea

Be The First To Review This Product!

Help other National Welding and Industrial Supplies users shop smarter by writing reviews for products you have purchased.

Write a product review