A36 CombiDisc Aluminium Oxide Abrasive Disc CDR 50 A 36 Pferd 47200072

DESCRIPTION:

For general coarse to fine grinding applications in industry and professional trades. The CDR clamping system has a threaded connection with a male thread (plastics) on the tool side. Also suitable for the following commonly used systems: Roloc, Lockit, Speed Lok TR, Power Lock Type III, Fastlock-System B, Roll-on.

FEATURES:

• High economic efficiency as a tool can be changed quickly.
• Very comfortable due to ease of use and low-vibration working.
• No disruptions in use due to adhesion, slipping, or coming loose.

RECOMMENDATIONS FOR USE:

• Use combidisc abrasive discs with an abrasive disc holder on flexible shaft drives with an angle handpiece, or small compressed-air or electric angle grinders.
• Use grinding oil that is suitable for the material in order to significantly increase the tool life and the abrasive performance of the tools.

SAFETY NOTES:

• The maximum permitted peripheral speed is 50m/s.
• For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.

MATERIALS THAT CAN BE WORKED:

• Annealed cast iron
• Brass
• Bronze
• Cast steel
• Copper
• Fibre-reinforced thermosetting plastics (GRP, CRP)
• Grey/nodular cast iron (GG/GJL, GGG/GJS)
• Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC)
• Nickel-based alloys (e.g., Inconell and Hastelloy)
• Stainless steel (INOX)
• Steel materials with a hardness > 54 HRC
• Steels up to 1,200 N/m² (< 38 HRC)
• Thermoplastics
• Titanium
• Titanium alloys

APPLICATIONS:

• Deburring
• Leveling
• Roughening
• Sharpening
• Step-by-step fine grinding
• Surface work
• Working on edges
• Work on weld seams        

DRIVE TYPES:

• Angle grinder
• Cordless angle grinder
• Drive spindle
• Flexible shaft drive
• Manual application
• Straight grinder               

SPECIFICATIONS:          

Part Number/SKU: 47200072

* Product Images are for illustration purposes only, unless otherwise specified colour may be different.