KHE5-40 COMBINATION HAMMER

Description:

  • Metabo VibraTech (MVT): integrated damping system and side handle to reduce vibrations in order to protect the user's health
  • Rotation stop for chiselling
  • Vario-Tacho-Constamatic (VTC)-Full Wave Electronics for working at customised speeds to suit the application material and speeds that remain almost constant, even under load
  • Thumbwheel for Speed Preselection
  • Electronic soft start for precise spot-drilling
  • Optimum heat dissipation and low weight thanks to magnesium die cast gear housing
  • Metabo S-automatic torque limiting clutch: mechanical decoupling of the drive for safe working should the drill stop unexpectedly.
  • Wear indication for the carbon brushes shows when the carbon brushes are due for replacement

 

Characteristics:


Max. single blow energy (EPTA)                 7.5 J
Maximum impact rate                                  3200 /min
Rated input power                                       1010 W
Drill-Ø concrete with hammer drills             40 mm / 1 9/16 "
Drill-Ø masonry with core bits                     90 mm / 3 9/16 "
No-Load Speed                                           200 - 350 /min
Torque                                                         95 Nm / 841 in-lbs
Bit retainer                                                   SDS-max
Impact power                                              400 J/s
Collar diameter                                           60 mm / 2 3/8 "
Weight (without power cable)                     6.2 kg / 13.7 lbs
Cable length                                               4 m / 13 ft


Vibration:


Hammer drilling concrete                            13.5 m/s²
Uncertainty of measurement K                   1.5 m/s²
Chiseling                                                     11.5 m/s²
Uncertainty of measurement K                   1.5 m/s²


Noise emission:


Sound pressure level                                  95 dB(A)
Sound power level                                      106 dB(A)
Uncertainty of measurement K                   3 dB(A)

Scope of Delivery:

Metabo VibraTech (MVT) side handle
Drilling depth guide
Lubricant for tool shank end
Duster
Plastic Carry Case

 

 


Part Number/SKU: 600687190

* Product Images are for illustration purposes only, unless otherwise specified colour may be different.

SKU 600687190
Barcode # 4007430274281
Brand Metabo
Shipping Weight 6.0000kg
Shipping Width 0.400m
Shipping Height 0.300m
Shipping Length 0.600m
Shipping Cubic 0.072000000m3

Be The First To Review This Product!

Help other National Welding and Industrial Supplies users shop smarter by writing reviews for products you have purchased.

Write a product review


KHE5-40 COMBINATION HAMMER

Description:

  • Metabo VibraTech (MVT): integrated damping system and side handle to reduce vibrations in order to protect the user's health
  • Rotation stop for chiselling
  • Vario-Tacho-Constamatic (VTC)-Full Wave Electronics for working at customised speeds to suit the application material and speeds that remain almost constant, even under load
  • Thumbwheel for Speed Preselection
  • Electronic soft start for precise spot-drilling
  • Optimum heat dissipation and low weight thanks to magnesium die cast gear housing
  • Metabo S-automatic torque limiting clutch: mechanical decoupling of the drive for safe working should the drill stop unexpectedly.
  • Wear indication for the carbon brushes shows when the carbon brushes are due for replacement

 

Characteristics:


Max. single blow energy (EPTA)                 7.5 J
Maximum impact rate                                  3200 /min
Rated input power                                       1010 W
Drill-Ø concrete with hammer drills             40 mm / 1 9/16 "
Drill-Ø masonry with core bits                     90 mm / 3 9/16 "
No-Load Speed                                           200 - 350 /min
Torque                                                         95 Nm / 841 in-lbs
Bit retainer                                                   SDS-max
Impact power                                              400 J/s
Collar diameter                                           60 mm / 2 3/8 "
Weight (without power cable)                     6.2 kg / 13.7 lbs
Cable length                                               4 m / 13 ft


Vibration:


Hammer drilling concrete                            13.5 m/s²
Uncertainty of measurement K                   1.5 m/s²
Chiseling                                                     11.5 m/s²
Uncertainty of measurement K                   1.5 m/s²


Noise emission:


Sound pressure level                                  95 dB(A)
Sound power level                                      106 dB(A)
Uncertainty of measurement K                   3 dB(A)

Scope of Delivery:

Metabo VibraTech (MVT) side handle
Drilling depth guide
Lubricant for tool shank end
Duster
Plastic Carry Case

 

 

SKU 600687190
Barcode # 4007430274281
Brand Metabo
Shipping Weight 6.0000kg
Shipping Width 0.400m
Shipping Height 0.300m
Shipping Length 0.600m
Shipping Cubic 0.072000000m3

Be The First To Review This Product!

Help other National Welding and Industrial Supplies users shop smarter by writing reviews for products you have purchased.

Write a product review


More From This Category