TIG Welder Weldarc 200i AC/DC 

Weldarc 200i Key Features
200 Amp AC or DC TIG
AC TIG for Aluminium
170 Amp stick welder
Quality 8m TIG torch with in-built trigger and current control
HF Pulse start or Lift Arc start
Pulse TIG
Compact, lightweight design
Suits 2-4.0mm electrodes
15 Amp supply plug
VRD
A built in VRD (Voltage Reduction Device) delivers added safety when operating in Stick or Lift-TIG mode and meets the requirements of site work. Fully compliant to Australian Standards AS 60974.1 & AS1674.2 CAT C.

Portable
At 21kg, the Weldarc 200i can go wherever the job takes you, making it suitable
for onsite maintenance.

AC TIG
AC can be used specifically for TIG welding aluminium and aluminium alloys. The balance between positive and negative can be adjusted to control the amount of oxide cleaning or a more penetrating weld. When welding in AC current HF pulse start allows easy arc starting when welding aluminium.

DC TIG
DC TIG can be used for all steel, stainless steel, copper and alloys, titanium. When welding in DC current HF Pulse start allows easy not contact starts for critical applications.

Integrated Gas Valve
HF Pulse Start
HF Pulse is a non-contact arc starting method allowing easy arc start without the interference problems with conventional HF and eliminates tungsten contamination. Available in AC or DC TIG mode.

Built-In Operator Safety
The power source features a built-in thermal protection device that will activate if the machine is operated beyond its safe thermal operating zone.

Hot Start for Manual Arc
Built-in “Hot Start” feature in stick mode for even better arc starting.

Arc Force
Built in “Arc Force”, constantly monitors arc voltage and will boost output if low arc voltage occurs.

Lift Arc TIG Start
Easy to use lift arc starting for TIG welding. Eliminates scratch starting and tungsten electrode damage.

Generator Compatible
The Weldarc 200i is tolerant to unconditioned power from generators. It has been optimised and tested for compatibility with appropriate portable generators.

Warranty*
With a 2 year unlimited warranty, covering parts and labour, and supported by an Australia wide service network, you can be guaranteed you’re buying reliability and performance. *Power source only.

Generators*
Generators used to power this equipment must have a minimum capacity of 10kW continuous.

Due to variation between generators by different manufacturers, it is impossible for WIA to validate operation from all generators. Therefore, WIA recommend that operation of equipment on the generator is confirmed before purchasing either welder or the generator.

 

Weldarc 200i Key Features:

  • 200 Amp AC or DC TIG
  • AC TIG for Aluminium
  • 170 Amp stick welder
  • Quality 8m TIG torch with in-built trigger and current control
  • HF Pulse start or Lift Arc start
  • Pulse TIG
  • Compact, lightweight design
  • Suits 2-4.0mm electrodes
  • 15 Amp supply plug


VRD
A built in VRD (Voltage Reduction Device) delivers added safety when operating in Stick or Lift-TIG mode and meets the requirements of site work. Fully compliant to Australian Standards AS 60974.1 & AS1674.2 CAT C.

Portable
At 21kg, the Weldarc 200i can go wherever the job takes you, making it suitable
for onsite maintenance.

AC TIG
AC can be used specifically for TIG welding aluminium and aluminium alloys. The balance between positive and negative can be adjusted to control the amount of oxide cleaning or a more penetrating weld. When welding in AC current HF pulse start allows easy arc starting when welding aluminium.


DC TIG
DC TIG can be used for all steel, stainless steel, copper and alloys, titanium. When welding in DC current HF Pulse start allows easy not contact starts for critical applications.

Intergrated Gas Valve
HF Pulse Start
HF Pulse is a non-contact arc starting method allowing easy arc start without the interference problems with conventional HF and eliminates tungsten contamination. Available in AC or DC TIG mode.

Built-In Operator Safety
The power source features a built-in thermal protection device that will activate if the machine is operated beyond its safe thermal operating zone.

Hot Start for Manual Arc
Built-in “Hot Start” feature in stick mode for even better arc starting.

Arc Force
Built in “Arc Force”, constantly monitors arc voltage and will boost output if low arc voltage occurs.

Lift Arc TIG Start
Easy to use lift arc starting for TIG welding. Eliminates scratch starting and tungsten electrode damage.

Generator Compatible
The Weldarc 200i is tolerant to unconditioned power from generators. It has been optimised and tested for compatibility with appropriate portable generators.

 


Part Number/SKU: MC105-0

* Product Images are for illustration purposes only, unless otherwise specified colour may be different.

Primary Voltage Rated Primary Current Max. Primary Current Recommended Generator kVa Supply Plug Rated Output @ 40C (10min) Welding Current Range Electrode Size Range (mm) Shipping Weight Machine Weight
240 Vac - 50/60 Hz 13 Amps 34 Amps 10 kVA 15 Amps

Stick MMA
170 Amps @ 26.8 Volts, 15% Duty Cycle

66 Amps @ 22.6 Volts, 100% Duty Cycle

5 - 170 Amps 2.0
2.5
3.2
4.0
32kg 21kg

TIG
200 Amps @ 18 Volts, 15% Duty Cycle

77 Amps @ 12.1 Volts, 100 Duty Cycle

5 - 200 Amps
SKU MC105-0
Barcode # 2000000002354
Brand WIA
Shipping Weight 30.0000kg
Shipping Width 0.770m
Shipping Height 0.460m
Shipping Length 0.350m
Shipping Cubic 0.123970000m3
Unit Of Measure ea

Warranty*
With a 2 year unlimited warranty, covering parts and labour, and supported by an Australia wide service network, you can be guaranteed you’re buying reliability and performance. *Power source only.

Be The First To Review This Product!

Help other National Welding and Industrial Supplies users shop smarter by writing reviews for products you have purchased.

Write a product review


TIG Welder Weldarc 200i AC/DC 

Weldarc 200i Key Features
200 Amp AC or DC TIG
AC TIG for Aluminium
170 Amp stick welder
Quality 8m TIG torch with in-built trigger and current control
HF Pulse start or Lift Arc start
Pulse TIG
Compact, lightweight design
Suits 2-4.0mm electrodes
15 Amp supply plug
VRD
A built in VRD (Voltage Reduction Device) delivers added safety when operating in Stick or Lift-TIG mode and meets the requirements of site work. Fully compliant to Australian Standards AS 60974.1 & AS1674.2 CAT C.

Portable
At 21kg, the Weldarc 200i can go wherever the job takes you, making it suitable
for onsite maintenance.

AC TIG
AC can be used specifically for TIG welding aluminium and aluminium alloys. The balance between positive and negative can be adjusted to control the amount of oxide cleaning or a more penetrating weld. When welding in AC current HF pulse start allows easy arc starting when welding aluminium.

DC TIG
DC TIG can be used for all steel, stainless steel, copper and alloys, titanium. When welding in DC current HF Pulse start allows easy not contact starts for critical applications.

Integrated Gas Valve
HF Pulse Start
HF Pulse is a non-contact arc starting method allowing easy arc start without the interference problems with conventional HF and eliminates tungsten contamination. Available in AC or DC TIG mode.

Built-In Operator Safety
The power source features a built-in thermal protection device that will activate if the machine is operated beyond its safe thermal operating zone.

Hot Start for Manual Arc
Built-in “Hot Start” feature in stick mode for even better arc starting.

Arc Force
Built in “Arc Force”, constantly monitors arc voltage and will boost output if low arc voltage occurs.

Lift Arc TIG Start
Easy to use lift arc starting for TIG welding. Eliminates scratch starting and tungsten electrode damage.

Generator Compatible
The Weldarc 200i is tolerant to unconditioned power from generators. It has been optimised and tested for compatibility with appropriate portable generators.

Warranty*
With a 2 year unlimited warranty, covering parts and labour, and supported by an Australia wide service network, you can be guaranteed you’re buying reliability and performance. *Power source only.

Generators*
Generators used to power this equipment must have a minimum capacity of 10kW continuous.

Due to variation between generators by different manufacturers, it is impossible for WIA to validate operation from all generators. Therefore, WIA recommend that operation of equipment on the generator is confirmed before purchasing either welder or the generator.

 

Weldarc 200i Key Features:

  • 200 Amp AC or DC TIG
  • AC TIG for Aluminium
  • 170 Amp stick welder
  • Quality 8m TIG torch with in-built trigger and current control
  • HF Pulse start or Lift Arc start
  • Pulse TIG
  • Compact, lightweight design
  • Suits 2-4.0mm electrodes
  • 15 Amp supply plug


VRD
A built in VRD (Voltage Reduction Device) delivers added safety when operating in Stick or Lift-TIG mode and meets the requirements of site work. Fully compliant to Australian Standards AS 60974.1 & AS1674.2 CAT C.

Portable
At 21kg, the Weldarc 200i can go wherever the job takes you, making it suitable
for onsite maintenance.

AC TIG
AC can be used specifically for TIG welding aluminium and aluminium alloys. The balance between positive and negative can be adjusted to control the amount of oxide cleaning or a more penetrating weld. When welding in AC current HF pulse start allows easy arc starting when welding aluminium.


DC TIG
DC TIG can be used for all steel, stainless steel, copper and alloys, titanium. When welding in DC current HF Pulse start allows easy not contact starts for critical applications.

Intergrated Gas Valve
HF Pulse Start
HF Pulse is a non-contact arc starting method allowing easy arc start without the interference problems with conventional HF and eliminates tungsten contamination. Available in AC or DC TIG mode.

Built-In Operator Safety
The power source features a built-in thermal protection device that will activate if the machine is operated beyond its safe thermal operating zone.

Hot Start for Manual Arc
Built-in “Hot Start” feature in stick mode for even better arc starting.

Arc Force
Built in “Arc Force”, constantly monitors arc voltage and will boost output if low arc voltage occurs.

Lift Arc TIG Start
Easy to use lift arc starting for TIG welding. Eliminates scratch starting and tungsten electrode damage.

Generator Compatible
The Weldarc 200i is tolerant to unconditioned power from generators. It has been optimised and tested for compatibility with appropriate portable generators.

 

Warranty*
With a 2 year unlimited warranty, covering parts and labour, and supported by an Australia wide service network, you can be guaranteed you’re buying reliability and performance. *Power source only.

Primary Voltage Rated Primary Current Max. Primary Current Recommended Generator kVa Supply Plug Rated Output @ 40C (10min) Welding Current Range Electrode Size Range (mm) Shipping Weight Machine Weight
240 Vac - 50/60 Hz 13 Amps 34 Amps 10 kVA 15 Amps

Stick MMA
170 Amps @ 26.8 Volts, 15% Duty Cycle

66 Amps @ 22.6 Volts, 100% Duty Cycle

5 - 170 Amps 2.0
2.5
3.2
4.0
32kg 21kg

TIG
200 Amps @ 18 Volts, 15% Duty Cycle

77 Amps @ 12.1 Volts, 100 Duty Cycle

5 - 200 Amps
SKU MC105-0
Barcode # 2000000002354
Brand WIA
Shipping Weight 30.0000kg
Shipping Width 0.770m
Shipping Height 0.460m
Shipping Length 0.350m
Shipping Cubic 0.123970000m3
Unit Of Measure ea

Be The First To Review This Product!

Help other National Welding and Industrial Supplies users shop smarter by writing reviews for products you have purchased.

Write a product review

Associated products


Others Also Bought


MIG Welder 250 MTS MIG/MMA/TIG Unimig KUMJRRW250MIG

MIG Welder 250 MTS MIG/MMA/TIG Unimig KUMJRRW250MI

Part No: KUMJRRW250MIG

$1,650.00
Weldmatic 250I Compact Package CP138-1

Weldmatic 250I Compact Package CP138-1

Part No: CP138-1

$1,695.00
Stick/Tig 160 PFC DC Unimig Razor

Stick/Tig 160 PFC DC Unimig Razor

Part No: KUMJRRW160CA

$725.00
Tig/MMA Welder X-Series ST 141X 691141

Tig/MMA Welder X-Series ST 141X 691141

Part No: 691141

Now $249.00
On Sale
MIG/STICK/TIG Welder 248X MST X-Series Bossweld 699248
On Sale

More From This Category


181X TIG/MMA Welder Package Bossweld 691181BUNDLE

181X TIG/MMA Welder Package Bossweld 691181BUNDLE

Part No: 691181BUNDLE

Now $399.00
On Sale
Arc/Tig Inverter Welder 180 Amps SVAT180

Arc/Tig Inverter Welder 180 Amps SVAT180

Part No: SVAT180

Now $299.00
On Sale
ASPECT 200 AUS Machine Only

ASPECT 200 AUS Machine Only

Part No: K14189-2

$5,495.00
CADDY TIG 2200i AC/DC

CADDY TIG 2200i AC/DC

Part No: CADDYTIG2200iACDC

$0.00
Dimension 650 Multi-Purpose Welder MR907618

Dimension 650 Multi-Purpose Welder MR907618

Part No: MR907618

$11,495.00
Dynasty 210DX High Precision AC/DC Tig Welding Miller MR907686003-1 (Machine Only)

Dynasty 210DX High Precision AC/DC Tig Welding Mil

Part No: MR907686003-1

$7,295.00
Dynasty 400 Arc / Tig Welder Miller MR907717002

Dynasty 400 Arc / Tig Welder Miller MR907717002

Part No: MR907717002

$12,399.00