VIPER 120 SYNERGIC Bundle

The VIPER™ 120 SYNERGIC features MIG programs for 0.6mm, 0.8mm and 0.9mm wire. It can take Flux-Cored and Mild Steel MIG wires.The built-in 10 AMP Plug makes this the perfect welder for your home workshop or out on the field. Weighing just 5.2kg, you’ll be able to take the VIPER™ 120 SYNERGIC anywhere you need

VIPER™ 120 SYNERGIC MIG Welder Contents 

  • 2m Direct Connect MIG Torch (including consumables)
  • Earth Clamp & Lead
  • 2m Gas Hose Complete with fittings
  • 1kg 0.8mm Gasless Wire
  • Operating Manual


CONTENTS

  • VIPER 120 SYNERGIC (KUMJRVM120)
  • ROGUE Welding Gloves (UMGW8)
  •  Consumable Starter Kit (UMSK15)
  • TOXIC Welding Helmet (UMTWH)

 

VIPER 120 SYNERGIC (KUMJRVM120)

Welding has never been easier with the VIPER 120 SYNERGIC. Simply set your wire size, adjust the Synergic power knob and the VIPER 120 SYNERGIC does the rest! Running off a 10 AMP plug, this machine is perfect for small repairs and DIY welding projects.

The VIPER 120 SYNERGIC features MIG programs for 0.6mm, 0.8mm and 0.9mm wire. It can take Flux-Cored and Mild Steel MIG wires.

The built in 10 AMP Plug makes this the perfect welder for your home workshop or out on the field. Weighing just 5.2kg, you’ll be able to take the VIPER 120 SYNERGIC anywhere you need.

PACKAGE INCLUDES 

  • VIPER 120 SYNERGIC MIG Welder
  • 2m Direct Connect Size 15 MIG Torch (including consumables)
  • Earth Clamp & Lead
  • 2M Gas hose complete with fittings 
  • 1kg Flux-Cored Wire 0.8mm
  • Operating Manual

SPECIFICATIONS 

 Part Number  KUMJRVM120
 Primary Input Voltage  240V 1 Phase
 Rated Input Power KVA  4.15 KVA
 ieff AMPS  6.5 Amps MIG
 Rated Output  40/16V-120A/20V
 Welding Current Range MIG  40 - 120 Amps
 No Load Voltage  49
 Duty Cycle 40 Deg C - MIG  10% @ 120Amps
 Insulation Class  F
 Dimensions (mm)  295x135x270mm
 Weight (Kgs)  4.0

ROGUE Welding Gloves (UMGW8)

 

The ROGUE™ Heavy Duty Welding Gloves are built for high heat and intensity MIG welding and plasma cutting. Made from heat and flame-resistant premium split cowhide and high-strength Kevlar stitching which adds durability and comfort when you need it most.

Features:

  • Premium cowhide leather
  • Reinforced palm
  • High-strength Kevlar
  • 400mm length

Specifications:

  • Length: 400mm
  • Gloves: Left & Right

 Consumable Starter Kit (UMSK15)

 

These kits are the perfect companion to be bundled alongside machines, containing all the essential consumables for MIG 15 Torch 

Kit Includes 

1 x MIG Plier (UMMP)
2 x Conical Nozzles (PGN15CON)
2 x Tip Holders (PCTH15)
2 x Nozzle Springs (PGNS15)
10 x 0.8mm Contact Tips (PCT0008-08)
10 x 0.9 Contact Tips (PCT0008-09)

TOXIC Welding Helmet (UMTWH)

 

The TOXIC Automatic Welding Helmet provides protection to your face and eyes from spatter and UV/IR radiation. Fitted with 2 arc sensors, the TOXICWelding Helmet features 9-13 Shade control as well as GRIND mode for use when grinding.

The TOXIC Welding Helmet comes with True Colour View Lens Technology to ensure you always get a clear and natural view of your surroundings and workpiece.

 Filter Dimensions   110 x 90 x 9mm
 View Size   96 x 42mm
 Arc Sensors  2
 Classifications  1/1/1/2
 Light state   4
 Dark state   9-13
 UV/IR Protection   DIN15
 Time from Light to Dark  0.1ms
 Time from Dark to Light   0.1-0.9s
 Senstivity Delay   Adjustable (Internal)
 Power Supply   Solar cells 
 Warranty   2 Years 
 Operating Temperature  -10°C to 65°C
 Storage Temperature   -20°C to 85°C 
 Shade control   Yes (External)
 Standards   CE, ANSI, CSA, CSA, AS/NZS

True Colour View Lens Technology
True Colour View Lens Technology greatly improves the optics of your helmet, letting you see a full spectrum of colours. It also helps to reduce eye fatigue making it safer for extended periods of welding. 

 

 

Choosing the Right UNIMIG Machine for You

Whether you’re a professional welder with industry experience or a weekend warrior with a welding hobby, the first thing you need is a welder.

There are a few factors that you should consider before diving into buying a machine. These include the material, the material thickness, the weld type (MIG, TIG or stick), the power, and, most importantly, your budget.

The material you want to weld, and its thickness, will determine the welding process that will work best for you, especially as not every welder can do every material.

What material are you going to be welding?

MIG

TIG

STICK

mild steel

stainless steel

aluminium

copper

bronze

mild steel

stainless steel

aluminium

copper

bronze

zinc alloys

mild steel

stainless steel

cast iron

How thick is the material you plan to weld?

 

MIG

TIG

STICK

< 200A

1mm-10mm

1mm-6mm

2mm-10mm

> 200A

1mm-12mm

1mm-8mm

2mm-12mm

500A

1mm-30mm

2mm-10mm

2mm-30mm

These sizes are subject to the power your welder can output, so always check the product specifications.

What’s the difference between MIG, TIG & Stick?

 

PROs

CONs

MIG

easy to learn

gasless option

gas tank

TIG

really thin metals

better looking welds

gas tank

hard to learn

STICK

no gas

limited to thicker material

Now you should have a decent idea of which type of welding you think will work best for your needs; we can start narrowing the options even more.

What power points are available to you?

The power you can plug into is going to dictate the range of machines you can pick from. A standard domestic outlet is 10 AMP, so everyone will have one of those.

A 10 AMP plug will usually support up to 180 AMPs, and a 15 AMP plug will usually support up to 200 AMPs. Anything over that will require an authorised electrician to install a plug (20 AMP or 32 AMP) for you by Australian law.

How long do you want to weld for?

There’s one main thing on a welder that will determine how long you’re going to be able to use a welder without stopping—the duty cycle.

If a welder has a duty cycle like this: 10% @ 180A, that means you can use the welder on its max AMPs (180A) for a full minute straight before it overheats. Duty cycle is measured in 10-minute increments, so if you have a 10% duty cycle at max AMPs, you’ll have 1 minute of constant welding and then 9 minutes cooldown time.

Viper vs Razor

Viper machines are designed for home DIY projects and weekend hobbyists, but they’re also great for any offsite work. The Viper machines are lightweight, portable, and with a 10 AMP plug, they’ll go just about anywhere. They’re built to be user friendly, making setting up and getting started as quick and easy as possible. The Viper machines come with helpful setup guides on their inside panel so that no matter what level welder you are, you can get the machine running without issues.

On the other hand, Razor machines are made to suit a range of professional and industrial need. They’re usually equipped with a 15 AMP plug, but some of the really high AMP machines require specialised plug sockets. The bigger plugs mean that most of the Razor range can reach a much higher max AMP output than the Vipers. Razor machines also come with a full 3-year warranty.

What kind of budget do you have?

Whether you’ve decided to MIG, TIG or stick weld, you’re going to need a few extras:

  • Filler metals
  • Consumables (these need to match your wire sizes which in turn need to match your material size)
  • Gas tanks (if needed)

Unimig Machines have decades of professional tried and tested technologies under their belts. You’ll be buying from a top tier, Aussie owned family business with local support centres across the country.

Synergic Control

A synergic welder is a machine that’s pre-programmed with a set of parameters that allow it to select the best settings for you automatically. The programs for UNIMIG’s synergic controlled machines were made in collaboration with an expert welder to ensure that their parameters are going to produce a good weld.

Synergic welders are an excellent choice for beginners, as you won’t need to spend any time messing with the settings to get the weld right. There’s no guesswork involved, and you’ve usually only got one knob to play around with.

Most synergic welding machines will ask for the wire thickness and the parent metal thickness. Once you’ve input these, it will automatically decide your voltage and wire speed for you, and you can start welding straight away.

 

 


Part Number/SKU: PK11001

* Product Images are for illustration purposes only, unless otherwise specified colour may be different.

SKU PK11001
Brand Unimig
Shipping Weight 14.0000kg
Shipping Width 0.500m
Shipping Height 0.450m
Shipping Length 0.500m
Shipping Cubic 0.112500000m3
Unit Of Measure Pk

Be The First To Review This Product!

Help other National Welding and Industrial Supplies users shop smarter by writing reviews for products you have purchased.

Write a product review


VIPER 120 SYNERGIC Bundle

The VIPER™ 120 SYNERGIC features MIG programs for 0.6mm, 0.8mm and 0.9mm wire. It can take Flux-Cored and Mild Steel MIG wires.The built-in 10 AMP Plug makes this the perfect welder for your home workshop or out on the field. Weighing just 5.2kg, you’ll be able to take the VIPER™ 120 SYNERGIC anywhere you need

VIPER™ 120 SYNERGIC MIG Welder Contents 

  • 2m Direct Connect MIG Torch (including consumables)
  • Earth Clamp & Lead
  • 2m Gas Hose Complete with fittings
  • 1kg 0.8mm Gasless Wire
  • Operating Manual


CONTENTS

  • VIPER 120 SYNERGIC (KUMJRVM120)
  • ROGUE Welding Gloves (UMGW8)
  •  Consumable Starter Kit (UMSK15)
  • TOXIC Welding Helmet (UMTWH)

 

VIPER 120 SYNERGIC (KUMJRVM120)

Welding has never been easier with the VIPER 120 SYNERGIC. Simply set your wire size, adjust the Synergic power knob and the VIPER 120 SYNERGIC does the rest! Running off a 10 AMP plug, this machine is perfect for small repairs and DIY welding projects.

The VIPER 120 SYNERGIC features MIG programs for 0.6mm, 0.8mm and 0.9mm wire. It can take Flux-Cored and Mild Steel MIG wires.

The built in 10 AMP Plug makes this the perfect welder for your home workshop or out on the field. Weighing just 5.2kg, you’ll be able to take the VIPER 120 SYNERGIC anywhere you need.

PACKAGE INCLUDES 

  • VIPER 120 SYNERGIC MIG Welder
  • 2m Direct Connect Size 15 MIG Torch (including consumables)
  • Earth Clamp & Lead
  • 2M Gas hose complete with fittings 
  • 1kg Flux-Cored Wire 0.8mm
  • Operating Manual

SPECIFICATIONS 

 Part Number  KUMJRVM120
 Primary Input Voltage  240V 1 Phase
 Rated Input Power KVA  4.15 KVA
 ieff AMPS  6.5 Amps MIG
 Rated Output  40/16V-120A/20V
 Welding Current Range MIG  40 - 120 Amps
 No Load Voltage  49
 Duty Cycle 40 Deg C - MIG  10% @ 120Amps
 Insulation Class  F
 Dimensions (mm)  295x135x270mm
 Weight (Kgs)  4.0

ROGUE Welding Gloves (UMGW8)

 

The ROGUE™ Heavy Duty Welding Gloves are built for high heat and intensity MIG welding and plasma cutting. Made from heat and flame-resistant premium split cowhide and high-strength Kevlar stitching which adds durability and comfort when you need it most.

Features:

  • Premium cowhide leather
  • Reinforced palm
  • High-strength Kevlar
  • 400mm length

Specifications:

  • Length: 400mm
  • Gloves: Left & Right

 Consumable Starter Kit (UMSK15)

 

These kits are the perfect companion to be bundled alongside machines, containing all the essential consumables for MIG 15 Torch 

Kit Includes 

1 x MIG Plier (UMMP)
2 x Conical Nozzles (PGN15CON)
2 x Tip Holders (PCTH15)
2 x Nozzle Springs (PGNS15)
10 x 0.8mm Contact Tips (PCT0008-08)
10 x 0.9 Contact Tips (PCT0008-09)

TOXIC Welding Helmet (UMTWH)

 

The TOXIC Automatic Welding Helmet provides protection to your face and eyes from spatter and UV/IR radiation. Fitted with 2 arc sensors, the TOXICWelding Helmet features 9-13 Shade control as well as GRIND mode for use when grinding.

The TOXIC Welding Helmet comes with True Colour View Lens Technology to ensure you always get a clear and natural view of your surroundings and workpiece.

 Filter Dimensions   110 x 90 x 9mm
 View Size   96 x 42mm
 Arc Sensors  2
 Classifications  1/1/1/2
 Light state   4
 Dark state   9-13
 UV/IR Protection   DIN15
 Time from Light to Dark  0.1ms
 Time from Dark to Light   0.1-0.9s
 Senstivity Delay   Adjustable (Internal)
 Power Supply   Solar cells 
 Warranty   2 Years 
 Operating Temperature  -10°C to 65°C
 Storage Temperature   -20°C to 85°C 
 Shade control   Yes (External)
 Standards   CE, ANSI, CSA, CSA, AS/NZS

True Colour View Lens Technology
True Colour View Lens Technology greatly improves the optics of your helmet, letting you see a full spectrum of colours. It also helps to reduce eye fatigue making it safer for extended periods of welding. 

 

 

Choosing the Right UNIMIG Machine for You

Whether you’re a professional welder with industry experience or a weekend warrior with a welding hobby, the first thing you need is a welder.

There are a few factors that you should consider before diving into buying a machine. These include the material, the material thickness, the weld type (MIG, TIG or stick), the power, and, most importantly, your budget.

The material you want to weld, and its thickness, will determine the welding process that will work best for you, especially as not every welder can do every material.

What material are you going to be welding?

MIG

TIG

STICK

mild steel

stainless steel

aluminium

copper

bronze

mild steel

stainless steel

aluminium

copper

bronze

zinc alloys

mild steel

stainless steel

cast iron

How thick is the material you plan to weld?

 

MIG

TIG

STICK

< 200A

1mm-10mm

1mm-6mm

2mm-10mm

> 200A

1mm-12mm

1mm-8mm

2mm-12mm

500A

1mm-30mm

2mm-10mm

2mm-30mm

These sizes are subject to the power your welder can output, so always check the product specifications.

What’s the difference between MIG, TIG & Stick?

 

PROs

CONs

MIG

easy to learn

gasless option

gas tank

TIG

really thin metals

better looking welds

gas tank

hard to learn

STICK

no gas

limited to thicker material

Now you should have a decent idea of which type of welding you think will work best for your needs; we can start narrowing the options even more.

What power points are available to you?

The power you can plug into is going to dictate the range of machines you can pick from. A standard domestic outlet is 10 AMP, so everyone will have one of those.

A 10 AMP plug will usually support up to 180 AMPs, and a 15 AMP plug will usually support up to 200 AMPs. Anything over that will require an authorised electrician to install a plug (20 AMP or 32 AMP) for you by Australian law.

How long do you want to weld for?

There’s one main thing on a welder that will determine how long you’re going to be able to use a welder without stopping—the duty cycle.

If a welder has a duty cycle like this: 10% @ 180A, that means you can use the welder on its max AMPs (180A) for a full minute straight before it overheats. Duty cycle is measured in 10-minute increments, so if you have a 10% duty cycle at max AMPs, you’ll have 1 minute of constant welding and then 9 minutes cooldown time.

Viper vs Razor

Viper machines are designed for home DIY projects and weekend hobbyists, but they’re also great for any offsite work. The Viper machines are lightweight, portable, and with a 10 AMP plug, they’ll go just about anywhere. They’re built to be user friendly, making setting up and getting started as quick and easy as possible. The Viper machines come with helpful setup guides on their inside panel so that no matter what level welder you are, you can get the machine running without issues.

On the other hand, Razor machines are made to suit a range of professional and industrial need. They’re usually equipped with a 15 AMP plug, but some of the really high AMP machines require specialised plug sockets. The bigger plugs mean that most of the Razor range can reach a much higher max AMP output than the Vipers. Razor machines also come with a full 3-year warranty.

What kind of budget do you have?

Whether you’ve decided to MIG, TIG or stick weld, you’re going to need a few extras:

  • Filler metals
  • Consumables (these need to match your wire sizes which in turn need to match your material size)
  • Gas tanks (if needed)

Unimig Machines have decades of professional tried and tested technologies under their belts. You’ll be buying from a top tier, Aussie owned family business with local support centres across the country.

Synergic Control

A synergic welder is a machine that’s pre-programmed with a set of parameters that allow it to select the best settings for you automatically. The programs for UNIMIG’s synergic controlled machines were made in collaboration with an expert welder to ensure that their parameters are going to produce a good weld.

Synergic welders are an excellent choice for beginners, as you won’t need to spend any time messing with the settings to get the weld right. There’s no guesswork involved, and you’ve usually only got one knob to play around with.

Most synergic welding machines will ask for the wire thickness and the parent metal thickness. Once you’ve input these, it will automatically decide your voltage and wire speed for you, and you can start welding straight away.

 

 

SKU PK11001
Brand Unimig
Shipping Weight 14.0000kg
Shipping Width 0.500m
Shipping Height 0.450m
Shipping Length 0.500m
Shipping Cubic 0.112500000m3
Unit Of Measure Pk

Be The First To Review This Product!

Help other National Welding and Industrial Supplies users shop smarter by writing reviews for products you have purchased.

Write a product review


Others Also Bought



More From This Category


RAZOR 250 MIG/TIG/STICK Bundle Unimig PK11050

RAZOR 250 MIG/TIG/STICK Bundle Unimig PK11050

Part No: PK11050

Now $1,875.00
On Sale
VIPER 120 SYNERGIC Bundle Unimig PK11001

VIPER 120 SYNERGIC Bundle Unimig PK11001

Part No: PK11001

Now $395.00
On Sale
191C MIG Welder Lincoln Powercraft K69072-1

191C MIG Welder Lincoln Powercraft K69072-1

Part No: K69072-1FREESHIPPING

$990.00
CADDY MIG C200I ESAB CADDYMIGC200i

CADDY MIG C200I ESAB CADDYMIGC200i

Part No: CADDYMIGC200i

$2,047.56