Refrigerated Compressed Air Dryer 25 L/S Capacity / 240V / 3/4” BSP F TFD15

The Pilot TFD 15 Refrigerated Compressed Air Dryer System is rated for Australian conditions with a flow rate based on an ambient temperature of 35°c. It offers a cost-effective air treatment solution, with reduced downtime, lower equipment maintenance costs and improved product finish.

Fitted with the efficient ALU-DRY heat exchanger, high-efficiency compressors, hot gas bypass valve and low-pressure drop, the system also offers reduced energy consumption
Upgraded electrical control panel
Hot gas bypass valve
Condensate drain
Rated for Australian conditions with a flow rate based on an ambient temperature of 35°c

 

 Model  TFD 15

 Flow Rate (L/sec)

 CFM

 25

 53

 Power Supply (Voltage)  240
 Port Sizes   (In/Out)  3/4″ BSP F
 Dimensions mm (W x D x H)  226 x 507 x 532

Technical data conforms to +/- 5%. Pilot Air reserves the right to modification without notice for design and technical improvements.
Warranty: 12 months on all products listed.
A 3 micron Pre-Filter is required to be fitted in the compressed Air System prior to the dryer to ensure product warranty

Data refers to the following condition: Ambient temperature of 35°c, with inlet air at 7 bar and 45°c. Pressure dew point as per Class 5-ISO Standard 8573.1.


Part Number/SKU: TFD15

* Product Images are for illustration purposes only, unless otherwise specified colour may be different.

MODEL
FAD @ 10 BAR* MOTOR
L/MIN CFM KW HP
DCR1309VS 396-1,218 14-43 9 12
SKU TFD15
Brand Pilot Air
Shipping Weight 35.0000kg
Shipping Width 0.600m
Shipping Height 0.500m
Shipping Length 0.600m
Shipping Cubic 0.180000000m3
Unit Of Measure ea

Be The First To Review This Product!

Help other National Welding and Industrial Supplies users shop smarter by writing reviews for products you have purchased.

Write a product review


Refrigerated Compressed Air Dryer 25 L/S Capacity / 240V / 3/4” BSP F TFD15

The Pilot TFD 15 Refrigerated Compressed Air Dryer System is rated for Australian conditions with a flow rate based on an ambient temperature of 35°c. It offers a cost-effective air treatment solution, with reduced downtime, lower equipment maintenance costs and improved product finish.

Fitted with the efficient ALU-DRY heat exchanger, high-efficiency compressors, hot gas bypass valve and low-pressure drop, the system also offers reduced energy consumption
Upgraded electrical control panel
Hot gas bypass valve
Condensate drain
Rated for Australian conditions with a flow rate based on an ambient temperature of 35°c

 

 Model  TFD 15

 Flow Rate (L/sec)

 CFM

 25

 53

 Power Supply (Voltage)  240
 Port Sizes   (In/Out)  3/4″ BSP F
 Dimensions mm (W x D x H)  226 x 507 x 532

Technical data conforms to +/- 5%. Pilot Air reserves the right to modification without notice for design and technical improvements.
Warranty: 12 months on all products listed.
A 3 micron Pre-Filter is required to be fitted in the compressed Air System prior to the dryer to ensure product warranty

Data refers to the following condition: Ambient temperature of 35°c, with inlet air at 7 bar and 45°c. Pressure dew point as per Class 5-ISO Standard 8573.1.

MODEL
FAD @ 10 BAR* MOTOR
L/MIN CFM KW HP
DCR1309VS 396-1,218 14-43 9 12
SKU TFD15
Brand Pilot Air
Shipping Weight 35.0000kg
Shipping Width 0.600m
Shipping Height 0.500m
Shipping Length 0.600m
Shipping Cubic 0.180000000m3
Unit Of Measure ea

Be The First To Review This Product!

Help other National Welding and Industrial Supplies users shop smarter by writing reviews for products you have purchased.

Write a product review