Razor Plasma Cutter 80 with Starter Kit and Air Filter  Unimig PK11034

Bundle Contents

1. RAZOR™ CUT 80 Plasma Cutter (KUPJRRW80)
2. UNIMIG Auto Welding Goggles (U21001K)
3. SC80 Plasma Torch Consumable Starter Kit (UMSK45)
4. Plasma Cutter Air Filter (50500-12)

RAZOR™ CUT 80 Plasma Cutter (KUPJRRW80)

The RAZOR™ CUT 80 is designed for maximum performance, offering the highest level of cutting performance from UNIMIG’s range. Capable of clean cutting 30mm and severing 35mm, this machine is for the professional needing maximum power from a portable machine.

Includes:

• 1 x 6m SC80 Plasma Torch
• 1 x 4m 300 AMP Earth Clamp
• 1 x Air Regulator
• 1 x Operating Manual

Features:

• Latest IGBT Inverter Technology
• CNC Connection
• Safe Euro torch connection
• High quality SC80 6 Metre Plasma torch
• Industrial application
• Tolerant to variable power supply
• In-built Air Regulator with preset air pressur
• Suitable to cut all electrically conductive materials
• Light weight and compact
• Strong metal housing, with plastic front and rear covers 
• Generator use with pure sine wave generator only

Specifications:

• Power Supply / Phases (V-Ph): 415 - 3 +/- 15%
• Duty Cycle @ 104°F: 40% @ 80Amps
• Rated Power: 22KVA
• imax (A): 20A
• ieff (A): 12.6A
• Output Current Range Plasma: 20-80A
• Rated Output Voltage: 340V
• Insulation Class: F
• Protection Class: IP21S
• Plasma Arc Starting: Pilot L/F
• Air Flow Pressure (MPA): 0.5 (75 psi)
• Air Flow Rate l/min: 189
• Cutting Thickness - Clean: 30mm
• Cutting Thickness - Severance: 35mm
• Certification Approval: AS/NZS 60974-1
• Dimensions: 560mm x 220mm x 415mm
• Weight: 16kg

Warranty:

• 2 Years Warranty Covered By UNIMIG (Machine Only)

UNIMIG Auto Welding Goggles (U21001K)

Allows welding in tight spaces where standard welding helmets are limited in space. The mask is also detachable from the goggles, allowing for even more versatility. 2 arc sensors constantly monitor the arc, allowing for consistent shade control so you can focus on your welds. ELITEVISIONTM Lens Technology greatly improves the optics of your helmet, letting you see a full spectrum of colours. It also helps to reduce eye fatigue making it safer for extended periods of welding. Designed to be worn with an Elipse® Half-Mask P2 Respirator, providing a minimum 99.95% filtration against odours, dust, all types of fumes, oil and water mists and micro-organisms. In combination with the ROGUE Welding Hood, the Welding Goggles and Mask provide protection against UV/IR rays.

Features:

• Strong LED Headlight
• Digital screen
• Respirator ready (not included)
• Detachable guard
• Grind mode
• 2 Arc sensors
• True colour view
• 5-13 Shade control

Suitable for:

• MIG
• TIG
• STICK
• PLASMA
• GRIND

Specifications:

• Filter Dimensions: 171.5 x 77.5 mm
• View Size: 110x40mm
• Arc Sensors: 2
• Classification: 1/1/1/2
• Light State: 3
• Dark State: 5-9 / 9-13
• UV/IR Protection: DIN15
• Time from Light to Dark: 0.08ms
• Time from Dark to Light: 0.1-0.9s
• Sensitivity Delay: Adjustable (External)
• Power Supply: Solar Cells & CR2450 Replaceable Battery
• Operating Temperature: -10 ̊C to 65 ̊C
• Storage Temperature: -20 ̊C to 85 ̊C
• Shade Control: Yes (External)
• Grind Mode: Yes (External)
• TIG Amperage: 5A
• Standards: CE, ANSI , CSA, AS/NZS

Warranty:

• 2 Years Warranty Covered By Unimig Australia

SC80 Plasma Torch Consumable Starter Kit (UMSK45)

Packaged in a sturdy carry case, consumable starter kits are now available to from UNIMIG. This kit is the perfect companion to be bundled alongside machines, which the kit containing all the essential consumables for an SC80 Plasma Torch.

CONTENTS:

1 x Swirl Ring (SC8006)
1 x Retaining Cap (SC8030)
5 x Electrodes (PSC8004)
5 x 0.9mm Cutting Tips (PSC8020-09)
5 x 1.0mm Cutting Tips (PSC8020-10)
1 x Stand Off Guide (SC8040)
1 x Cutting Buggy (SC8051)

Plasma Cutter Air Filter (50500-12)

‘AT 1000” is the perfect solution to the problems created by the contamination of the compressed air used in many plasma cutting systems. It eliminates “sputter” caused by moisture and oil from compressed air lines. It extends the electrode and tip life, with obvious benefits to the cut quality. Designed to remove areosol oil and moisture, the “AT 1000” is a real benefit, entrapping particles as small as .01 microns inches, with the “AT 1000” torches Iast longer. Using a plasma cutter without the “AT 1000” fitted will result in condensed moisture remaining in the torch and torch head. This moisture can cause a short-circuit, with subsequent costs for the replacement of the torch head. The ”AT 1000’ can filter up to 1250 Iiters a minute without reduction in pressure. It’s recommended to replace the filter cartridge every 5 to 7 days (max). It’s also very suitable for painters and use of pneumatic tools.

Includes:

• 1 x 50500-12 - Sub-Micronic Air Filte r
• 1 x 50505-48 - Sub-Micronic Cartridge

Specifications:

• Filtering degree: 01 pinch - 0.25 pm
• Maximum pressure: 125 PSI - 8.5 bar
• Maximum flow @ 80%: 2700 SCFH - 1250|/min
• Temperature range: 1 5-1 40F / -1 0 +60Co
• Size pipe: 1/4 NPT
• Dimension: 132mm x 200 mm

 

Part Number/SKU: PK11034

* Product Images are for illustration purposes only, unless otherwise specified colour may be different.