Notify me when back in stock
Hire Unit - MIG Welder 500 Double Pulse Synergic High Performance 3 Phase
INCLUDES
- 3PH 415V Power Source
- with Built-in water-cooling unit
- Separate wire feeder
- Parker 501W torch 3 Metres,
- Intermediate cables/5m
- Electrode holder & earth clamp 3 Metres
Advanced Features
- High Speed Pulse MIG (HSP) - Specifically designed for demanding workshop use, the deposition rate can increase 25~48 % for various materials.
- Ultra Low Spatters (ULS) -It is a modified shourt-arc transfer arc, it controls the volatility during the change of state between short and arc to control the amount and size of the spatter generated. Up to 75% less spatter, up to 25% saving on gas costs.
- Hybrid Pulse Control (HPC) - Mixes Pulse (spray arc) and short-circuit transfer types in one duty cycle. It Great performance for all pipe welding solutions.
- High Speed Spot Technology (HSS) - Offers a faster travel speed and better welding performance, especially for thin (less than 2mm) pipes or frame/structure welding jobs, like the furnitures etc.
- HSP Vertical-up Welding Process - Is twice faster than the traditional pulse welding. AndnNo need to swing, no undercuts or other defects!
- Pulse MIG Process - Welds Stainless Steel, 4XXX and 5XXX series Aluminum and Mild Steel for superior quality welding, especially for 1.2mm M.S.
- Double Pulse MIG Process - Delivers a staked dime appearance when welding mild steel and aluminum without swinging.
- Improved Operation Process & Controls - Initial Arc control, Burn Back control, Arc Length control, Dynamic control, these make an easier operation and handling for welding.
- Synergic Control - Set weld procedures with one control. Just easily takes 3 Steps to achieve weld perfection.
Get better welding seam
Less heat input, less spatters, less rework
Get higher welding strength
Deeper penetration, no undercut defects, higher strength.
The ULS/HPC/HSS is designed for Welding with Robot or Carriage
Welding with Robot or carriage to ensure an excellent performance .
Part Number/SKU: PROMIG500SYNDPULSE-H
Model Number: PWR4000
* Product Images are for illustration purposes only, unless otherwise specified colour may be different.
SPECIFICATION:
- Maximum pump pressure 4800PSI
- Maximum operating pump pressure 4000PSI
- Maximum pump flowrate 15LPM (900LPH)
- Motor Specifications Lavor 15HP(390cc) petrol motor, Low oil alert
- Dimensions 100CM(L) x 55CM(W) x 75CM(H)
- Weight 79KG
SKU | PROMIG500SYNDPULSE-H |
Model # | PWR4000 |
Brand | Easybeat |
Shipping Weight | 80.0000kg |
Shipping Width | 0.950m |
Shipping Height | 0.950m |
Shipping Length | 1.000m |
Shipping Cubic | 0.902500000m3 |
Unit Of Measure | ea |
Be The First To Review This Product!
Help other National Welding and Industrial Supplies users shop smarter by writing reviews for products you have purchased.
Hire Unit - MIG Welder 500 Double Pulse Synergic High Performance 3 Phase
INCLUDES
- 3PH 415V Power Source
- with Built-in water-cooling unit
- Separate wire feeder
- Parker 501W torch 3 Metres,
- Intermediate cables/5m
- Electrode holder & earth clamp 3 Metres
Advanced Features
- High Speed Pulse MIG (HSP) - Specifically designed for demanding workshop use, the deposition rate can increase 25~48 % for various materials.
- Ultra Low Spatters (ULS) -It is a modified shourt-arc transfer arc, it controls the volatility during the change of state between short and arc to control the amount and size of the spatter generated. Up to 75% less spatter, up to 25% saving on gas costs.
- Hybrid Pulse Control (HPC) - Mixes Pulse (spray arc) and short-circuit transfer types in one duty cycle. It Great performance for all pipe welding solutions.
- High Speed Spot Technology (HSS) - Offers a faster travel speed and better welding performance, especially for thin (less than 2mm) pipes or frame/structure welding jobs, like the furnitures etc.
- HSP Vertical-up Welding Process - Is twice faster than the traditional pulse welding. AndnNo need to swing, no undercuts or other defects!
- Pulse MIG Process - Welds Stainless Steel, 4XXX and 5XXX series Aluminum and Mild Steel for superior quality welding, especially for 1.2mm M.S.
- Double Pulse MIG Process - Delivers a staked dime appearance when welding mild steel and aluminum without swinging.
- Improved Operation Process & Controls - Initial Arc control, Burn Back control, Arc Length control, Dynamic control, these make an easier operation and handling for welding.
- Synergic Control - Set weld procedures with one control. Just easily takes 3 Steps to achieve weld perfection.
Get better welding seam
Less heat input, less spatters, less rework
Get higher welding strength
Deeper penetration, no undercut defects, higher strength.
The ULS/HPC/HSS is designed for Welding with Robot or Carriage
Welding with Robot or carriage to ensure an excellent performance .
SPECIFICATION:
- Maximum pump pressure 4800PSI
- Maximum operating pump pressure 4000PSI
- Maximum pump flowrate 15LPM (900LPH)
- Motor Specifications Lavor 15HP(390cc) petrol motor, Low oil alert
- Dimensions 100CM(L) x 55CM(W) x 75CM(H)
- Weight 79KG
SKU | PROMIG500SYNDPULSE-H |
Model # | PWR4000 |
Brand | Easybeat |
Shipping Weight | 80.0000kg |
Shipping Width | 0.950m |
Shipping Height | 0.950m |
Shipping Length | 1.000m |
Shipping Cubic | 0.902500000m3 |
Unit Of Measure | ea |
Be The First To Review This Product!
Help other National Welding and Industrial Supplies users shop smarter by writing reviews for products you have purchased.