Razor Tig 200 AC/DC Welder Unimig U12002K

Get incredible results from start to finish with this professional-grade TIG welder.

  • Effortlessly weld any metal with the high-frequency AC/DC TIG
  • The ultimate combination of AC and DC available with Mixed Arc settings
  • Switch your AC welds to suit your needs with the choice of four waveforms
  • HD Backlit Interface
  • This next generation interface panel is bright and easy to read in any environment.

RAZOR TIG 200 AC/DC Welder

  • 8m T2 TIG Torch
  • 4m Twist Lock Electrode Holder
  • 4m 300 Amp Earth Clamp & Lead
  • Argon Flowmeter Regulator
  • 1.8m Gas Hose with fittings
  • Operating Manual

Power Factor Correction (PFC)
PFC gives you maximum electrical efficiency. It automatically compensates for any voltage fluctuation, and PFC is also designed to be generator friendly.

10A Plug
A 10 AMP power plug can be used on any domestic outlet. It’s perfect for the DIY home handyman or the professional welder looking for a machine that can be used almost anywhere.

AC/DC
Weld every kind of metal. With the ability to run on an Alternating Current, you’re able to weld aluminium as effortlessly as mild and stainless steels.

High-Frequency TIG
Maximise your results from start to finish. A high-frequency torch can start an arc without contacting the workpiece, reducing the risk of contaminating the tungsten or the weld. It also means you get access to the entire TIG weld cycle, including pre- and post-gas and up and down slope parameters.


Multiple AC Waveforms
Completely customise your aluminium welds. Switch between Sine, Square, and Triangle waves to change the arc characteristics, bead profile, and penetration to suit your weld.

Mixed AC/DC
Experience the best of both worlds. Mixed AC/DC combines the efficiency of AC and the penetration of DC- TIG in one weld. With it, you get faster welding speeds, better penetration, a faster weld puddle on cold workpieces, and you can weld thicker materials.

Pulse TIG
Minimise the heat input without compromising on any of the penetration. Alternating between a peak and base current reduces the amount of heat input and focuses the arc, perfect for sheet metals and out-of-position welding.

Foot Control Ready
The perfect accessory, easily adjust your amperage to suit every weld as you go without disrupting your torch movement.

Smart Fan
Smart Fan diminishes noise, saves power, helps reduce energy costs, and minimises the number of contaminants being pulled through the machine.

Alternative SKU: KUM-M-RTIG200ACDC

Part Number/SKU: U12002K

* Product Images are for illustration purposes only, unless otherwise specified colour may be different.

SKU U12002K
Brand Unimig
Shipping Weight 25.0000kg
Shipping Width 0.450m
Shipping Height 0.650m
Shipping Length 0.650m
Shipping Cubic 0.190125000m3
Unit Of Measure ea

Be The First To Review This Product!

Help other National Welding and Industrial Supplies users shop smarter by writing reviews for products you have purchased.

Write a product review


Razor Tig 200 AC/DC Welder Unimig U12002K

Get incredible results from start to finish with this professional-grade TIG welder.

  • Effortlessly weld any metal with the high-frequency AC/DC TIG
  • The ultimate combination of AC and DC available with Mixed Arc settings
  • Switch your AC welds to suit your needs with the choice of four waveforms
  • HD Backlit Interface
  • This next generation interface panel is bright and easy to read in any environment.

RAZOR TIG 200 AC/DC Welder

  • 8m T2 TIG Torch
  • 4m Twist Lock Electrode Holder
  • 4m 300 Amp Earth Clamp & Lead
  • Argon Flowmeter Regulator
  • 1.8m Gas Hose with fittings
  • Operating Manual

Power Factor Correction (PFC)
PFC gives you maximum electrical efficiency. It automatically compensates for any voltage fluctuation, and PFC is also designed to be generator friendly.

10A Plug
A 10 AMP power plug can be used on any domestic outlet. It’s perfect for the DIY home handyman or the professional welder looking for a machine that can be used almost anywhere.

AC/DC
Weld every kind of metal. With the ability to run on an Alternating Current, you’re able to weld aluminium as effortlessly as mild and stainless steels.

High-Frequency TIG
Maximise your results from start to finish. A high-frequency torch can start an arc without contacting the workpiece, reducing the risk of contaminating the tungsten or the weld. It also means you get access to the entire TIG weld cycle, including pre- and post-gas and up and down slope parameters.


Multiple AC Waveforms
Completely customise your aluminium welds. Switch between Sine, Square, and Triangle waves to change the arc characteristics, bead profile, and penetration to suit your weld.

Mixed AC/DC
Experience the best of both worlds. Mixed AC/DC combines the efficiency of AC and the penetration of DC- TIG in one weld. With it, you get faster welding speeds, better penetration, a faster weld puddle on cold workpieces, and you can weld thicker materials.

Pulse TIG
Minimise the heat input without compromising on any of the penetration. Alternating between a peak and base current reduces the amount of heat input and focuses the arc, perfect for sheet metals and out-of-position welding.

Foot Control Ready
The perfect accessory, easily adjust your amperage to suit every weld as you go without disrupting your torch movement.

Smart Fan
Smart Fan diminishes noise, saves power, helps reduce energy costs, and minimises the number of contaminants being pulled through the machine.

SKU U12002K
Brand Unimig
Shipping Weight 25.0000kg
Shipping Width 0.450m
Shipping Height 0.650m
Shipping Length 0.650m
Shipping Cubic 0.190125000m3
Unit Of Measure ea

Be The First To Review This Product!

Help other National Welding and Industrial Supplies users shop smarter by writing reviews for products you have purchased.

Write a product review

Associated products


Others Also Bought



More From This Category