Hire Unit - MIG Welder Double Pulse Synergic 230V 1 Phase

Includes 

• 1PH, 240V Power Source
• MIG-24KD torch (AL)
• Electrode and Earth Lead 3 Metres 

Advanced Features

• Multi-Process Capable - Welds flux-cored, stick, TIG, pulsed MIG, and advanced processes like Double Pulse MIG
• Pulse MIG Process - Welds Mild steel, 4XXX and 5XXX series aluminum for superior quality welding.
• Double Pulse MIG Process - Delivers a staked dime appearance when welding mild steel and aluminum.
• Synergic Control - Set weld procedures with one control.
• Professional 4-Rollers Drive System - Allows for constant wire feed speed and consistent welds.

Pulse MIG

• The Pulse MIG process works by forming one droplet of molten metal at the end of the electrode per pulse. Then, just the right amount of current is added to push that one droplet across the arc and into the puddle. The transfer of these droplets occurs through the arc, one droplet per pulse.
• It minimizes warping and burnthrough on thin materials, not only for Aluminum, but also for Mild Steel. Moreover, it delivers ultra low spatters which is outstanding for Mild Steel welding.
• DOUBLE PULSE
  No need to swing, You can easily get a cosmetically pleasing weld seam, with significantly lower and more controller heat input into the workpiece. It results in much lower distortion and less rework for Mild steel and Aluminum sheets.

By Double Pulse process, the heat input of arc is alternating, effectively reducing the heat input of base metal. It reduces the occurrence of welding defects such as crack. Welding quality is comparable to TIG process.

Part Number/SKU: PROMIG-250SYNDPULSE-H
Model Number: HYPERL2015

* Product Images are for illustration purposes only, unless otherwise specified colour may be different.