FabCO Excel-Arc 71

A RUTILE FLUX CORED WIRE WITH GOOD IMPACT TOUGHNESS, FAST FREEZING SLAG, LOW FUMES & SPATTER.

Flat Position - Butt JointHorizontal Position - Butt JointHorizontal Position - Fillet JointVertical Position - UpOverhead Position - Butt Joint

Description
The FabCO Excel-Arc provides easy slag removal, good impact toughness, fast freezing slag, low fumes and spatter. The FabCO Excel-Arc is also able to bridge poor fit-up without burn-through.

Productivity Gain
Reduces part re-work / rejection
Reduces clean up time
Minimises risk of inclusions
Increases welder appeal

Benefits
Excellent out of position capability
Resist cracking in severe applications

Typical Applications
Can be used for structural fabrication, heavy equipment, general fabrication and non-alloyed and fine grain steels.

CLASSIFICATION
AWS A5.20: E71T-1C H8
E71T-9C H8
E71T-1M H8
E71T-9M H8
EN17632-B-T493T1/9-1 A C/M UH10

FEATURES: BENEFITS:
• Fast-freezing slag • Excellent out-of-position capability
• Low fumes and spatter • Increases welder appeal and productivity
• Easy slag removal • Reduces clean-up time, minimizes risk of inclusions
• Able to bridge poor fit-up without burn-through • Increases productivity, reduces part rework/rejection
• Good impact toughness • Resists cracking in severe applications

APPLICATIONS:
• Non-alloyed and fine grain steels • Structural fabrication • Heavy equipment
• Single and multi-pass welding • General Fabrication

SLAG SYSTEM: Fast-freezing, rutile-type, flux-cored wire
SHIELDING GAS: 100% Carbon Dioxide (CO2), 75-80% Argon (Ar)/Balance Carbon Dioxide (CO2), 35-50 cfh
 (17-24 l/min)
TYPE OF CURRENT: Direct Current Electrode Positive (DCEP)
STANDARD DIAMETERS: 0.035” (0.9 mm), 0.045” (1.2 mm), 0.052” (1.4 mm), 1/16” (1.6 mm), 5/64” (2.0 mm)
RE-DRYING: Not recommended

Alternative SKU: FabCO Excel-Arc 71

Part Number/SKU: S247112-029

* Product Images are for illustration purposes only, unless otherwise specified colour may be different.