Refrigerated Compressed Air Dryer 166.6 L/S Capacity / 240V / 2” BSP F TFD100

The Pilot TFD 6 Refrigerated Compressed Air Dryer System is rated for Australian conditions with a flow rate based on an ambient temperature of 35°c. It offers a cost-effective air treatment solution, with reduced downtime, lower equipment maintenance costs and improved product finish.

Fitted with the efficient ALU-DRY heat exchanger, high-efficiency compressors, hot gas bypass valve and low-pressure drop, the system also offers reduced energy consumption
Upgraded electrical control panel
Hot gas bypass valve
Condensate drain
Rated for Australian conditions with a flow rate based on an ambient temperature of 35°c

 

 Model  TFD 100

 Flow Rate (L/sec)

 CFM

 166.6

 353

 Power Supply (Voltage)  240
 Port Sizes   (In/Out)  2″ BSP F
 Dimensions mm (W x D x H)  483 x 1104 x 1040

Technical data conforms to +/- 5%. Pilot Air reserves the right to modification without notice for design and technical improvements.
Warranty: 12 months on all products listed.
A 3 micron Pre-Filter is required to be fitted in the compressed Air System prior to the dryer to ensure product warranty

Data refers to the following condition: Ambient temperature of 35°c, with inlet air at 7 bar and 45°c. Pressure dew point as per Class 5-ISO Standard 8573.1.


Part Number/SKU: TFD100

* Product Images are for illustration purposes only, unless otherwise specified colour may be different.

SKU TFD100
Brand Pilot Air
Shipping Weight 165.0000kg
Shipping Width 0.750m
Shipping Height 1.200m
Shipping Length 1.200m
Shipping Cubic 1.080000000m3

Be The First To Review This Product!

Help other National Welding and Industrial Supplies users shop smarter by writing reviews for products you have purchased.

Write a product review


Refrigerated Compressed Air Dryer 166.6 L/S Capacity / 240V / 2” BSP F TFD100

The Pilot TFD 6 Refrigerated Compressed Air Dryer System is rated for Australian conditions with a flow rate based on an ambient temperature of 35°c. It offers a cost-effective air treatment solution, with reduced downtime, lower equipment maintenance costs and improved product finish.

Fitted with the efficient ALU-DRY heat exchanger, high-efficiency compressors, hot gas bypass valve and low-pressure drop, the system also offers reduced energy consumption
Upgraded electrical control panel
Hot gas bypass valve
Condensate drain
Rated for Australian conditions with a flow rate based on an ambient temperature of 35°c

 

 Model  TFD 100

 Flow Rate (L/sec)

 CFM

 166.6

 353

 Power Supply (Voltage)  240
 Port Sizes   (In/Out)  2″ BSP F
 Dimensions mm (W x D x H)  483 x 1104 x 1040

Technical data conforms to +/- 5%. Pilot Air reserves the right to modification without notice for design and technical improvements.
Warranty: 12 months on all products listed.
A 3 micron Pre-Filter is required to be fitted in the compressed Air System prior to the dryer to ensure product warranty

Data refers to the following condition: Ambient temperature of 35°c, with inlet air at 7 bar and 45°c. Pressure dew point as per Class 5-ISO Standard 8573.1.

SKU TFD100
Brand Pilot Air
Shipping Weight 165.0000kg
Shipping Width 0.750m
Shipping Height 1.200m
Shipping Length 1.200m
Shipping Cubic 1.080000000m3

Be The First To Review This Product!

Help other National Welding and Industrial Supplies users shop smarter by writing reviews for products you have purchased.

Write a product review