Anti Spatter - ASPR (Wet Formula) CT-ASPR-500

Chemtools® Zero SpatTM ASPR Wet Formula Anti Spatter forms a wet film that prevents weld spatter from sticking to weld equipment, fixtures, and metal surfaces during welding. The spatter and residue can easily be wiped away after the welding is completed, leaving a light corrosion protective film on the metal.

PRODUCT FEATURES 

  • Fast drying
  • solvent based
  • Silicone-free
  • Prevents rust and corrosion
  • Non-flammable

BENEFITS: 

  • Spatter wipes away
  • Improves productivity
  • Economical in use
  • Eliminates the need for chiselling and grinding, after welding
  • Easy clean up - Does not cause weld porosity

APPLICATION: Shake aerosol can vigorously for 10 seconds. Spray an even light coating onto the work piece and/or welding nozzle at a distance of 150 to 200 mm using a sweeping motion. Allow the solvent to evaporate before welding. Product should be used with adequate ventilation.

STORAGE: Store at room temperature between 5°C to 30°C. Do not place in direct sunlight or near any heat source. Do not leave in vehicle cabins.

SAFETY: Avoid breathing any fumes, mists and vapours. Use of approved breathing apparatus is required for more than minimal exposure. Always work in areas with adequate ventilation to allow solvent fumes to dissipate. If the Technical Data Sheet: CT-ASPR Zero SpatTM Anti-Spatter Page 2 material gets into the eyes, flush thoroughly with clear water for fifteen minutes, then seek medical treatment. Avoid skin contact. Observe all safety precautions. It is important when using solvent based materials or solvents to keep away from open flames or ignition source.

PRECAUTIONS: This product is capable of producing adverse health effects ranging from minor skin irritation to serious systemic effects. None of these materials should be used, stored, or transported until the handling precautions and recommendations as stated in the Material Safety Data Sheets (MSDS) for this and all other products being used are understood by all persons who will work with the material.


Part Number/SKU: CT-ASPR-500

* Product Images are for illustration purposes only, unless otherwise specified colour may be different.

SKU CT-ASPR-500
Brand Chemtools
Shipping Weight 1.0000kg
Shipping Width 0.100m
Shipping Height 0.300m
Shipping Length 0.100m
Shipping Cubic 0.003000000m3
Unit Of Measure ea

Be The First To Review This Product!

Help other National Welding and Industrial Supplies users shop smarter by writing reviews for products you have purchased.

Write a product review


Anti Spatter - ASPR (Wet Formula) CT-ASPR-500

Chemtools® Zero SpatTM ASPR Wet Formula Anti Spatter forms a wet film that prevents weld spatter from sticking to weld equipment, fixtures, and metal surfaces during welding. The spatter and residue can easily be wiped away after the welding is completed, leaving a light corrosion protective film on the metal.

PRODUCT FEATURES 

  • Fast drying
  • solvent based
  • Silicone-free
  • Prevents rust and corrosion
  • Non-flammable

BENEFITS: 

  • Spatter wipes away
  • Improves productivity
  • Economical in use
  • Eliminates the need for chiselling and grinding, after welding
  • Easy clean up - Does not cause weld porosity

APPLICATION: Shake aerosol can vigorously for 10 seconds. Spray an even light coating onto the work piece and/or welding nozzle at a distance of 150 to 200 mm using a sweeping motion. Allow the solvent to evaporate before welding. Product should be used with adequate ventilation.

STORAGE: Store at room temperature between 5°C to 30°C. Do not place in direct sunlight or near any heat source. Do not leave in vehicle cabins.

SAFETY: Avoid breathing any fumes, mists and vapours. Use of approved breathing apparatus is required for more than minimal exposure. Always work in areas with adequate ventilation to allow solvent fumes to dissipate. If the Technical Data Sheet: CT-ASPR Zero SpatTM Anti-Spatter Page 2 material gets into the eyes, flush thoroughly with clear water for fifteen minutes, then seek medical treatment. Avoid skin contact. Observe all safety precautions. It is important when using solvent based materials or solvents to keep away from open flames or ignition source.

PRECAUTIONS: This product is capable of producing adverse health effects ranging from minor skin irritation to serious systemic effects. None of these materials should be used, stored, or transported until the handling precautions and recommendations as stated in the Material Safety Data Sheets (MSDS) for this and all other products being used are understood by all persons who will work with the material.

SKU CT-ASPR-500
Brand Chemtools
Shipping Weight 1.0000kg
Shipping Width 0.100m
Shipping Height 0.300m
Shipping Length 0.100m
Shipping Cubic 0.003000000m3
Unit Of Measure ea

Be The First To Review This Product!

Help other National Welding and Industrial Supplies users shop smarter by writing reviews for products you have purchased.

Write a product review