Aluminium Manual Overhead Cutting Machine 

  • Relevance with CE Standards 
  • The machine can cut at 45, -45 and intermediate degrees
  • Quick adjustment bumpers for 90, 75, 60, 45 degrees Table fixing lever for intermediate degrees
  • Profile jamming is practically done by a pneumatic system 
  • Diamond shape saw diameter is 400
  • Measuring and Transport conveyors are available as a standard (2M right-left).

Option 

  • Cooling system for aluminium profile cutting 
  • Roller Conveyor system (3mt)


Things that the user should do and pay attention to before the installation of machine 

  • The pipeline of the air  installation should be approximately 270cm above the compressor. The pipe diameter of the air line must be minimum 20mm and maximum 25mm. Each machine must have a seperate pipeline and this line should be approximately 80cm above the ground from the back of the machine.
  • The pipe lines of the air line should be 1/2 and the valve should be installed. It is mandatory to ahve a dryer and water trap filter in front of the compressor. Otherwise, water accumalated in the compressor will damage the pneumatic components of machine.
  • Compress the water  of the compressor every day. This process must be applied in the condition that the water accumalating in the conditioners found in the machines. Electrical circuit line must be made to experienced people. Our company will not be responsible for any problem that may arise from incorrect and incomplete installations.
  • The installation cable must be at least 4 x 2.5 Machines need about 4KW power 
  • The first installation of the machine should not be done without the knowledge of its Authorized service. 

Technical Characterstics and information 

  • Cutting of PVC and aluminium profiles in one way with a single button 
  • Press seperate operation feature 
  • Saw diameter 400mm 
  • PVC and aluminium cutting according to easy cutting facility 
  • Optional cooling system installed (Option)
  • Optional roller conveyor is installed (Option)
  • Motor 1.5 KW 
 Standard Voltage   415 V 
 Frequency   50 Hz 
 Total Power   1.5 KW 
 Air pressure   Min 5 Bar 
 Air consumption   1.5 lt/dk
 Machine width   65cm 
 Machine Height   70 Cm 
 Machine Weight   50 Kg 

 


National Plus Guarantee

 

Quality Products at extraordinary rates. We choose from a range of dependable brands, that have proven that they can get the job done.

Our purchasing team negotiates with a variety of suppliers to deliver you quality products at affordable rates.

Seen a better price, or do you have any compliments or complaints? Contact us directly for after sales support and we’ll work together to solve any problems. 



Part Number/SKU: SC431

* Product Images are for illustration purposes only, unless otherwise specified colour may be different.

SKU SC431
Brand National Plus
Shipping Weight 200.0000kg
Shipping Width 0.900m
Shipping Height 0.900m
Shipping Length 0.900m
Shipping Cubic 0.729000000m3
Unit Of Measure ea

Be The First To Review This Product!

Help other National Welding and Industrial Supplies users shop smarter by writing reviews for products you have purchased.

Write a product review


Aluminium Manual Overhead Cutting Machine 

  • Relevance with CE Standards 
  • The machine can cut at 45, -45 and intermediate degrees
  • Quick adjustment bumpers for 90, 75, 60, 45 degrees Table fixing lever for intermediate degrees
  • Profile jamming is practically done by a pneumatic system 
  • Diamond shape saw diameter is 400
  • Measuring and Transport conveyors are available as a standard (2M right-left).

Option 

  • Cooling system for aluminium profile cutting 
  • Roller Conveyor system (3mt)


Things that the user should do and pay attention to before the installation of machine 

  • The pipeline of the air  installation should be approximately 270cm above the compressor. The pipe diameter of the air line must be minimum 20mm and maximum 25mm. Each machine must have a seperate pipeline and this line should be approximately 80cm above the ground from the back of the machine.
  • The pipe lines of the air line should be 1/2 and the valve should be installed. It is mandatory to ahve a dryer and water trap filter in front of the compressor. Otherwise, water accumalated in the compressor will damage the pneumatic components of machine.
  • Compress the water  of the compressor every day. This process must be applied in the condition that the water accumalating in the conditioners found in the machines. Electrical circuit line must be made to experienced people. Our company will not be responsible for any problem that may arise from incorrect and incomplete installations.
  • The installation cable must be at least 4 x 2.5 Machines need about 4KW power 
  • The first installation of the machine should not be done without the knowledge of its Authorized service. 

Technical Characterstics and information 

  • Cutting of PVC and aluminium profiles in one way with a single button 
  • Press seperate operation feature 
  • Saw diameter 400mm 
  • PVC and aluminium cutting according to easy cutting facility 
  • Optional cooling system installed (Option)
  • Optional roller conveyor is installed (Option)
  • Motor 1.5 KW 
 Standard Voltage   415 V 
 Frequency   50 Hz 
 Total Power   1.5 KW 
 Air pressure   Min 5 Bar 
 Air consumption   1.5 lt/dk
 Machine width   65cm 
 Machine Height   70 Cm 
 Machine Weight   50 Kg 

 

SKU SC431
Brand National Plus
Shipping Weight 200.0000kg
Shipping Width 0.900m
Shipping Height 0.900m
Shipping Length 0.900m
Shipping Cubic 0.729000000m3
Unit Of Measure ea

Be The First To Review This Product!

Help other National Welding and Industrial Supplies users shop smarter by writing reviews for products you have purchased.

Write a product review