NWT100E :
ARC WELDER - ELECTRONIC 100AMP 100AMP ELECTRONIC WELDER Electronic welder for Arc & Tig Max current 100amps Welds up to 5mm mild steel Turbo fan cooled - longer welding period
Thermal overload protection - automatically cuts out to prevent overheating. Includes - 1.7 metre welding cable set with electrode holder and earth clamp Complete with arc leads in blow mould case Hot Start – easier to strike arc Anti stick – Shuts down if electrode sticks Arc force – current auto increase if arc length is too short

NWT140P :
140 AMP Arc Welder
140amp welding power - welds up to 6mm thick. Turbo fan cooled - longer period of welding
Domestic power supply - uses standard 10amp power point. Thermal overload protection - automatically cuts out to prevent overheating. Infinitely variable amperage adjustment - more control for better results. Ready to weld - accessories included: welding mask, chipping hammer/wire brush, electrode holder, earth clamp with cable & welding electrodes Duty cycle 15%@100A 100%@45A

NWT170P :
POWERARC 170:170amp FAN COOL ARC WELDER 170 AMP Arc Welder
170amp (peak) welding power - welds up to 8mm thick. Turbo fan cooled - longer period of welding Duty Cycles - 10% @ 160amps, 20% @ 115amps & 40% @ 80amp. Thermal overload protection - automatically cuts out to prevent overheating. Infinitely variable amperage adjustment - more control for better results. Ready to weld - accessories included: welding mask, chipping hammer/wire brush, electrode holder & earth clamp with cable

NWT200W :
POWERARC 200:200amp W/MOUNT ARC WELDER 200 AMP Arc Welder
200amp (peak) welding power - welds up to 9mm thick Turbo fan cooled longer period of welding
Duty Cycles - 10% @ 180amps, 25% @ 115amps & 50% @ 80amps Thermal overload protection - automatically cuts out to prevent overheating
Infinitely variable amperage adjustment - more control for better results
Ready to weld - accessories included: welding mask, chipping hammer/wire brush, electrode holder & earth clamp with cable

NWT215W :
POWERARC 215:215amp W/MOUNT WELDER 215 AMP Arc Welder 215amp (peak) welding power - welds up to 10mm thick Turbo fan cooled – longer period of welding Duty Cycles – 10% @ 200amps, 30% @ 115amps & 60% @ 80amps Thermal overload protection – automatically cuts out to prevent overheating Infinitely variable amperage adjustment – more control for better results Dual input Voltage – use on single phase (240v) or three phase (415v) Dinse plug leads connections – heavy duty for longer life Ready to weld – accessories included: welding mask, chipping hammer/wire brush, electrode holder & earth clamp with cable