|
| |
Idealarc DC-400
Part Number: KA1369-1 220/380/440/3/50/60
KA1369-3 415/3/50/60
Description: The DC-400 is one of the worlds most recognised multi-process
welding machines. It has withstood the test of time, even in the harshest
environments. The DC-400 provides outstanding arc characteristics on both
constant current and constant voltage processes. This provides great welding
versatility in a single power source.
Advantage Lincoln
Multi-process CC and CV capability
Volt and Amp meter
Solid state circuitry for long life and repetitive welding applications
Single full output control
Mode switch for selecting desired output characteristics
Arc force control for soft arc or forceful driving arc
Arc control adjustment for changing inductance/pinch effect
3 year warranty
Recommended Options
Multi-process Switch, Remote Output Control, Undercarriage,TIG Module, VRD
(reduced open circuit voltage). Suggested Wire Feeders
LN-214, LN-7, LN-742, LN-8, LN-9, LN-9 GMA, LN-10, DH-10, LN-23P, LN-25, NA-3,
NA-5, LT-7
Processes
Stick, TIG, MIG, FCAW, FCAW-SS, SAW, Gouging
Output Range (Amps) Rated Output (Duty Cycle) Rated Input Dimensions (mm)
H x W x D
Net Weight (kg)
60-500A 500A, 40V @ 50%
400A, 36V @ 100%
39A
73/42/37A
698 x 561 x 840
220
Idealarc DC-600
Part Number: KA1342-1 415/3/50/60
KA1342-3 220/380/440/3/50/60
KA1342-4 200/3/50/60
Description: The DC-600 is a multi-process DC arc welding power source that
produces outstanding arc characteristics in both constant voltage and constant
current processes. Designed for high productivity
applications in MIG, FCAW, MMAW, TIG, SAW and carbon arc gouging (up to 10mm
rods). The DC-600 is built for high performance and can handle 24 hour, 7 days a
week operation. The all weather protection and
the submerged dipping of the transformer, choke and SCR assembly in a special
epoxy based sealing/insulating material provides extra long life and added
protection from harsh environments such as salt air, moisture or corrosive
atmospheres.
Advantage Lincoln
Multi-process CC and CV capability
Single full range output control
Volt and amp meters
Mode switch for selecting CV-wire/ gouging, CV-sub arc and CC-MMAW/TIG
42/115 volt aux. for wire feeders.
Two DC-600s can be paralleled for up to 1200 amp @ 100% duty cycle output
3 year warranty
Recommended Options
Multi-process Switch, Remote Output Control, TIG Module, Parallelling Kit,
Undercarriage, VRD (voltage reduction device). Suggested Wire Feeders LN-214,
LN-7, LN-742, LN-8, LN-9, LN-10, DH-10, LN-25, LN-23P, NA-3, NA-5, LT-7.
Processes
MMAW, TIG, MIG, FCAW, FCAW-SS,
SAW, Gouging
Output Range (Amps) Rated Output (Duty Cycle) Rated Input Dimensions (mm)
H x W x D
Net Weight (kg)
70-850A 750A, 44V @ 50%
600A, 44V @ 100%
62A
117/68/58A
781 x 565 x 965
237
Idealarc DC-1000
Part Number: K1387-3 220/380/440/50/60
K1387-6 415/3/50/60
Description: For full automatic high duty cycle submerged arc welding, the
DC-1000 makes an ideal power source. The DC- 1000 is a multi-process DC arc
welding power source, designed for high productivity applications in SAW, MIG,
FCAW and carbon arc gouging (up to 16mm rods). With a 1000 amp 100% duty cycle
the DC-1000 is designed too operate 24 hour/7days a week. The all weather
protection and submerged dipping of the transformer, choke and SCR assembly in
a special epoxy based sealing/insulating material provides extra long life and
added protection from harsh environments such as salt air, moisture or corrosive
atmospheres.
Advantage Lincoln
Multi-process CC and CV capability
Single full range output control
Equipped with a 500A @ 100% terminal for greater control of applications below
450 amp
Volt and amp meters
115 volt aux. for wire feeders
Two DC-1000s can be paralleled for up to 2000 amp @ 100% duty cycle output
3 year warranty
Recommended Options
Remote Control, Parallelling Kit, Undercarriage. Suggested Wire Feeders
LN-7, LN-8, LN-9, NA-3, NA-5, LT-7.
Processes
MIG, FCAW, FCAW-SS, SAW, Gouging
Output Range (Amps) Rated Output (Duty Cycle) Rated Input Dimensions (mm)
H x W x D
Net Weight (kg)
150-1300A 1000A, 44V @ 100%
193/112/96.5A
102A
781 x 572 x 991
372
Idealarc DC-1500 and AC-1200
Part Number: DC-1500 K1383-5 415/3/50/60
AC-1200 K1382-6 415/3/50/60
Description: If you are looking for the industrys leading power sources for
submerged arc welding. The Lincoln DC-1500 and AC-1200 are the
power sources that you can count on dayin and day-out. For high duty cycle
single and multi-arc applications such as; spiral pipe mills, fabrication of
universal beams, heavy pipe fabrication to name a few.
The DC-1500 is designed for submerged arc, flux cored wires and carbon arc
gouging (9.5 to 16mm rods). The AC-1200 is designed for AC submerged arc welding
and is used for the trail electrodes in multiple arc applications. The all
weather protection and submerged dipping of the transformer, choke and SCR
assembly in a special epoxy based
sealing/insulating material, provides extra long life and added protection from
harsh environments such as salt air, moisture or corrosive atmospheres.
Advantage Lincoln
Solid state circuitry provides extra long life for high production, repetitive
welding applications
Single full range output control
115 volt aux for wire feeders
Windings and rectifiers protected against moisture and corrosive environments
Thermostatic protection and fan cooled
Line voltage compensation
3 year warranty
DC-1500 only
Multi-process CV and CC capability
Mode switch for selecting CVFCAW/ gouging, CV-SAW and CC-for
large puddle high current SAW
Two DC-1500s can be paralleled for up to 3000 amp @ 100% duty cycle output
Recommended Options
Remote Output Control, Parallelling Kit (DC-1500 only)
Suggested Wire Feeders
NA-3, NA-5, LT-7 (DC-1500) NA-4 (AC-1200)
Processes
FCAW, FCAW-SS, SAW
Output Range (Amps) Output Range Rated Output (Duty Cycle) Rated Input
Dimensions (mm)
H x W x D
Net Weight (kg)
DC-1500
AC-1200
200-1500A
240-1500A
1500A, 44V @ 100%
1200A, 44V @100%
198A
202A
1453 x 566 x 965
1453 x 566 x 965
644
Invertec V350-PRO
Part Number: K1728-8 200/230/380/415/440/1/3/50/60
Description: Designed smart, built tough. The Invertec V350-PRO is the most
powerful portable inverter power source in its class. Smart operation allows it
to handle any stick, TIG, and MIG applications. Utilising the optimum wave form
for each welding
process and consumable. Additional waveforms can be downloaded to meet new or
special consumables. Its plug-and-play intelligence allows it to automatically
adjust to your Lincoln wire feeder and remote controls instantly.
Advantage Lincoln
Lightweight, compact design
5 position output mode switch for outstanding arc characteristics
42 VAC aux power for wire feeders
Optional pulse panel with pulse on pulse
Smooth MIG welding output for short arc, globular or spray arc welding
transfers
RS232 port for downloading new waveforms
Single full range output control
Digital volt and amp meters
3 year warranty
Recommended Options
Advance Process Panel (Pulse), Hand Amptrol, Foot Amptrol, Remote Output
Control, VRD (voltage reduction device) Suggested Wire Feeders LN-742, LN-10,
DH-10, LN-25, Cobramatic
Processes
MMAW, TIG, MIG, Pulse MIG, FCAW,
FCAW-SS, Gouging
Output Range (Amps) Rated Output (Duty Cycle) Rated Input Dimensions (mm)
H x W x D
Net Weight (kg)
5-425A 350A, 34V @ 60%
275A, 31V @ 100%
48/37/23/22/21A
373 x 318 x 706
37
Multi-WeldTM System For On-Site Multiple Stick and Wire Welding
Part Number: Multi-Weld 350 K1735-1
Multi-Source K1752-1
Description: The Multi-Weld ͺ System - Lincolns Multi-Weld System offers an
entirely
new and better way to build large structures like ships, water towers,
buildings, oil
platforms or any other structure where the welder must come to the weld.
The Multi-Source- As a primary source of power, the Multi- Source eliminates
many of the cable nightmares found at other job sites by providing a single weld
cable that distributes
the power. The Multi-Source may be centrally located to feed a few individual
Multi-Weld
350s, or as many as 20 or more systems!
The Multi-Weld 350- Simply speaking, the Multi-Weld 350 packs a lot of power
into a compact system. The Multi-Weld 350 is a 350 amp, DC+, 100% duty cycle
welder capable of CV-wire, CC-stick or arc gouging. Multi-Weld 350s may be used
singularly or paralleled for 700 amps of superior arc gouging power!
Product Name Input DC Volts Rated DC+ Output Amps/Volts/Duty Cycle Input Amps at
Rated DC Output (80V DC) Output Range Dimensions (mm)
H x W x D
Net Weight (kg)
Multi-Weld 350
AC-1200
80V DC (50-113 Peak Range)
350A/34V/100% DC+
165
15-40 Volts
30-350 Amps
(max. 78 OCV)
295 x 254 x 546
27
Product Name Input DC Volts Rated DC+ Output Amps/Volts/Duty Cycle Input
Voltage/ Input Frequence Input Amps @ Rated DC Output Dimensions (mm)
H x W x D
Net Weight (kg)
Multi-Source 380-415/
440-460/
550-575
3 Phase
50/60 Hz 40 KVA/100%
@ 80V DC (max)
36 KVA/100%
@ 80V DC (max)
460V/60Hz 460V/60Hz 575V/60Hz
98A 83A 69A
415V/50Hz 440V/50Hz 550V/50Hz
99A 79A 66A
787 x 559 x 1016 450
|
