|
Click the links below to find a particular Gas Equipment or use CTRL+F
CO2 HEATER
101 FL 230V
Part No. 400218
CO2 gas heater, clamps onto stem of CO2 regulator for warming of CO2 gas, 240
volts.
GAS CUTTING AND GOUGING NOZZLES
Type 41 Acetylene — Standard Speed
Plate Fuel Oxy gas Flow/
Size(mm) Thickness(mm) Gas Pressure Flow Part No.
@ 100 kPa
6 1-5 2 11(200) 400030
8 5-10 3.5 20(200) 400031
12 10-20 4 38(200) 400032
15 20-50 7 75(350) 400033
20 50-80 9 134(400) 400034
24 150-200 12.5 232(500) 400035
32 225-300 20 420(600) 400036
Type 44 LPG — Standard Speed Oxy gas
Plate Fuel Oxy gas Flow/
Size(mm) Thickness(mm) Gas Pressure Flow Part No.
@ 100 kPa
6 3-6 2 17(200) 400039
8 6-12 3.5 30(200) 400040
12 12-20 4.5 58(250) 400041
15 25-75 5.5 99(400) 400042
20 100-125 6.5 171(400) 400043
24 150-200 9 256(500) 400044
32 225-300 14 456(600) 400045
3 Seat Acetylene — Standard Speed
Size(mm) Plate Thickness(mm) Part No.
00 5 400079
0 5-10 400080
1 10-15 400081
2 15-30 400082
3 30-40 400083
4 40-50 400084
5 50-100 400085
6 100-150 400086
3 Seat LPG — Standard Speed
Size(mm) Plate Thickness(mm) Part No.
00 5 400099
0 5-10 400100
1 10-15 400101
2 15-30 400102
3 30-40 400103
4 40-50 400104
5 50-100 400105
6 100-150 400106
GOUGING NOZZLES
Type 41 Oxy/Acetylene — Bent
Fuel gas flow Total oxygen flow &
Size l/min @ 100 kPa pressure l/min @ 100 kPa Part No.
32GB 15 61(500) 400060
48GB 18 85(600) 400061
Type 44 LPG — Straight
Fuel gas flow Total oxygen flow &
Size l/min @ 100 kPa pressure l/min @ 100 kPa Part No.
32GS 12 94(500) 400070
32GB 12 94(500) 400071
48GB 13 120(600) 400072
Torch Handle
Part No. 400011
Standard torch handle for use with Oxy/Acetylene, Oxy/LPG and Oxy/Natural gases.
1 ea/pkt blister pack hangable.
Cutting Attachment
Part No. 400013
Standard cutting attachment, connects to standard torch handle. Use with Type 41
Acetylene and Type 44 LPG cutting nozzles. 1 ea/pkt blister pack hangable.
3/8 (10mm) Mixer
Part No. 400012
10mm mixing chamber for use with standard torch handle, suitable for
Oxy/Acetylene and Oxy/LPG gases. 1 ea/pkt blister pack hangable.
1/2 (13mm) Mixer
Part No. 400008
13 mm mixing chamber for use with standard torch handle, suitable for
Oxy/Acetylene and Oxy/LPG gases. Connects superheating barrel to standard torch
handle. 1 ea/pkt blister pack hangable.
Heavy Duty Multipurpose Cutting Torch
Part No. 400005
Used for heavy duty cutting of steel up to 300mm, this torch can be used with
either Oxy/Acetylene or Oxy/LPG gas at any pressure, simply adjust the pressure
to match tip size. Stainless steel tubes and mixing chamber provide maximum heat
and flashback resistance.
HEATING TIPS
Heating Tip Type 551 — Size 8 x 12
Part No. 400020
Attaches directly to 3/8” Mixer. For use with Acetylene gas.
1 ea/pkt blister pack hangable.
Oxy/Acetylene Welding Tips — Type 551
Plate Pressure Pressure
Size(mm) Thickness(mm) Oxy (Kpa) Acet (Kpa) Part No.
6 1.2 50 50 400014
8 2 50 50 400015
10 2.3 50 50 400016
12 3.2-4.0 50 50 400017
15 5.0-6.5 50 50 400018
20 8.2-10.0 50 50 400019
Oxy/LPG Welding Tips — Type 554
Plate Pressure Pressure
Size(mm) Thickness(mm) Oxy (Kpa) LPG (Kpa) Part No.
8 2 50 50 400022
10 2.3 50 50 400023
12 3.2-4.0 50 50 400024
15 5.0-6.5 50 50 400025
20 8.2-10.0 50 50 400026
EQUIPMENTS
Plate Cutter with 1.8mt Rail
Part No. 4CG30
This plate cutter is capable of cutting thicknesses of 5mm to 50mm. Complete
with a 1.8m rail, and LPG cutting tips, cutting
straight lines, bevels and circles.Weighing 10kg, this machine has an adjustable
speed control and fan cooling system. 1.8m rail available separately. Multiple
rails can be interlocked to create any required cutting length. Heavy Duty model
cuts up to 250mm.
Type Part No.
Plate Cutter with 1.8mt Rail 4CG30
Two Head with Rail 4CG30-II
Heavy Duty Two Head with Rail 4CG100
Rail 4CG-R
Pipe Cutter with Chain
Part No. 4SG-30
This pipe cutter is able to cut through pipes with a thickness of up to 50mm and
a diameter of 100mm to 600mm. Simple to use,
this machine can cut both straight and bevel edges and adjusts easily to
accommodate differing pipe diameters.Weighing just 9kg, it comes complete with
chain and cutting tips. Accessories: Additional 3mt chain.
Type Part No.
Pipe Cutter with Chain 4SG-30.
Chain (3mt to suit 4SG-30) 4SG-30C
Template Cutter
Part No. 4WEL55
This template cutting machine enables users to cut circular and other templates
from plate steel.Weighing 50kg, the machine is portable and can be used on
uneven surfaces by using the level adjustor. Features include adjustable speed
control, forward and reverse mode, 360° rotation apability and large cutting
area.
SUPERHEATING EQUIPMENT
Superheating Barrel 450mm
Part No. 400220
Connects directly onto 13mm mixer for using Superheating tips.
Superheating Tips
Heat Output Pressure kPa Flow – LPM
Size Gas MJ/Hr Oxy Fuel Oxy Fuel Part No.
8x12 Acet 180 150 100 45-58 41-55 400225
12x12 Acet 215 200 100 74 65 400226
18x12 LPG 280 500 100 200 50 400227
36x12 LPG 420 600 100 300 75 400228
48x12 LPG 560 600 100 400 100 400229
LPG AIR EQUIPMENT
LPB-SNK Torch Handle
Part No. 400301
Multipurpose LPG Heating System for use in many applications including plumbing,
repair and maintenance and handyman work.
Type Size Part No.
LPB-SNK Torch Handle – 400301
LPB-SNKE Torch Handle – 400302
LPB-N750 Neck Tube, Bent 750mm long 400303
LPB-N180 Neck Tube, Bent 180mm long 400304
LPB-N70 Neck Tube, Bent 70mm long 400305
LPB-HN15S Burner 15mm 400306
LPB-HN19 Burner 19mm 400307
LPB-HN25 Burner 25mm 400308
LPB-HN29 Burner 29mm 400309
LPB-HN32 Burner 32mm 400310
LPB-HN 4 Burner 42mm 400311
Hose Kit 5mm Dia x 2.0mts 400312
Nut and Tail/Nipple – 400313
Tip Cleaners
Housed in a sturdy metal case, these wires remove carbon build up and loose slag
from Type 41 Acetylene and Type 44 LPG nozzles and tips.The Tip Cleaner Long is
suitable for 3 Seat Tips.
Type Part No.
Short 71mm 400140
Long 100mm 400141
Spark Lighter Single Flint
This cup type lighter allows for fast, easy ignition. Flint is replaceable. 25
per ctn
Type Pkt Part No.
Spark Lighter Single Flint 10pce.pkt 400142
Replacement Flints 10pce.pkt 400143
Spark Lighter Three Flint
Ergonomic design, hardwearing file and rigid arm allows for faster ignition.
Flints can be rotated and are replaceable.
Type Pkt Part No.
Spark Lighter Triple Flint 400145
Replacement Flints 4pce/pkt 400146
Cylinder Key
Part No. 400148
For use with industrial gas cylinders.
Combination Spanner
Part No. 400149
Handy spanner for fitting regulators, torches and nozzles.
GAS TROLLEYS
Securely holds two gas cylinders with a holding chain. Sturdy, solid rubber
wheels allow for easy maneuverability.
Type Part No.
Cylinder Trolley “D” Size 400150
Cylinder Trolley “E” Size 400151
Cylinder Trolley “G” Size 400152
GAS REGULATORS
Single Stage regulators offer precise delivery of industrial gases.Twin gauge
models show bottle contents and outlet pressure, these robust regulators suit
many applications. Manufactured to AS 4267-1995. Spare parts available on
request. Features: No soldered joints, clear easy to read gauges, tough perspex
lens on gauge, solid construction.
Type Part No.
A Oxygen 400212
B Acetylene 400213
C Argon Co2 Twin Gauge 400210
D Argon Co2 Bobbin type 400211
E Argon Flowmeter 0-25 Lpm 400215
F LPG High Pressure Regulator 400217
HOSE ASSEMBLIES
Twin Hose Assembly
Blue/Red (Oxy/Acetylene) rubber hose with 5mm inside diameter. Ready cut lengths
complete with 5/8” brass fittings. Conforms to Australian Standard.
Length(mtr) Ctn Part No.
5mtr 20/ctn 400174
10mtr 10/ctn 400175
15mtr 5/ctn 400176
Retractable Twin Hose Assembly
Encased in heavy duty polypropylene casing, retractable hose assemblies keep the
work area safe and tidy. Comes complete with fittings.
Length(mtr) Dia(mm) Type Part No.
20mtr 10mm Air 400180
15mtr 05mm Oxy/Acet 400181
15mtr 05mm Oxy/LPG 400182
BULK RUBBER HOSE
Single Hose 5mm
Rubber hose with 5mm inside diameter. Conforms to Australian Standard. 10mm
available on request.
Type Part No.
LPG-Orange 400165
Acet-Red 400170
Oxy-Blue 400171
Available in 100 metre rolls.
Twin Hose 5mm
Twin rubber hose with 5mm inside diameter. Conforms to Australian Standard.10mm
available on request.
Type Part No.
Oxy & Acet 400172
Oxy & LPG 400173
Available in 100 metre rolls.
Kits
Oxygen/Acetylene Plumbers Kit
Part No. 400001
Oxygen Regulator & Acetylene Regulator, Torch Handle, Mixer, Acetylene Welding
Tips (Size 12 & 15), Flint Lighter, 5mt Twin Hose Assembly & Flip Up Oxy Goggles
in canvas tool bag.
Manufactured to AS 4267-1995.
Oxygen/LPG Plumbers Kit
Part No. 400002
Oxygen Regulator & LPG Regulator,Torch Handle, Mixer, LPG Welding Tips (Size 12
& 15), Flint Lighter, 5mt Twin Hose Assembly & Flip Up Oxy Goggles in canvas
tool bag.
Manufactured to AS 4267-1995.
Oxygen/Acetylene Cutting & Welding Kit
Part No. 400010
Oxygen Regulator & Acetylene Regulator, Torch Handle, Mixer, Cutting Attachment,
Welding Tips (Size 8,10,12,15 & 20) Cutting Nozzles (Size 8,12 & 15) Tip
Cleaner, Flint Lighter,Cylinder Key, Combination Spanner, 5mt Twin Hose Assembly
& Flip Up Oxy Goggles in black carry case. Manufactured to AS 4267-1995. Single
or 2 pc Ctn
Oxygen/LPG Cutting & Welding Kit
Part No. 400009
Oxygen Regulator & LPG Regulator,Torch Handle, Mixer, Cutting Attachment,Welding
Tips (Size 8,10,12,15 & 20) Cutting Nozzles (Size 8,12 & 15) Tip Cleaner, Flint
Lighter, Cylinder Key, Combination Spanner, 5mt Twin Hose Assembly & Flip Up Oxy
Goggles in black carry case. Manufactured to AS 4267-1995. Single or 2 pc Ctn
HOSE FITTINGS
Screw-in Hose Connectors
Screw type connector suitable for 5 mm inside diameter hose.
Type Part No.
LP112 – RH (Oxygen) 400190
LP240 – LH (Fuel) 400191
Crimp Hose Connector Kits
Type Part No.
Oxy Kit – RH (Oxy) for 5mm 400197
Acet Kit – LH (Fuel) for 5mm 400198
Oxy Kit – RH (Oxy) for 10mm 400199
Acet Kit – LH (Fuel) for 10mm 400200
Nuts & Tails
Type Part No.
5/8” Right Hand Nut (Oxygen) 400201
5/8” Left Hand Nut (Fuel) 400202
Tail/Nipple 5mm 400203
Tail/Nipple 10mm 400204
Crimp on Hose Clamps
Type Part No.
Hose Clamp 9/11mm NCVA.FS.9.11
Hose Clamp 11/13mm NCVA.FS.11.13
Hose Clamp 13/15mm NCVA.FS.13.15
Hose Clamp 15/18mm NCVA.FS.15.18
Hose Joiners
Type Part No.
LP265 Hose Joiner 400192
WB34 Joiner RH 5/8 (Oxygen) 400193
WB35 Joiner LH 5/8 (Fuel) 400194
R121 “Y” Connector RH (Oxygen) 400195
R125 “Y” Connector LH (Fuel) 400196
Barb Kits
Type Part No.
5mm Double Ended Barb Kit 400188
10mm Double Ended Barb Kit 400189
ROLLER GUIDES
Roller Guide Tanjant
Part No. 4TJ1602
Suits all Type 41/44.
Circle Cutting Guide Tanjant
Part No. 4TJ1083
Suits all Type 41/44.
Complete Accessory Kit Tanjant
Part No. 4GP3001
Tanjant Complete Accessory Kit includes: Circle Cutting Guide, Roller Guide,
Magnetic Pivot, Bevel Attachment, Radius Bar and
Pivot, Stabilizer, Fasteners and an instruction book all in a sturdy plastic
carry case. Suits all Type 41/44.
Roller Guide Circle Cutter
Part No. 400350
Handy guide for making straight and beveled cuts using robust wheels for
consistent distance of plates.
| 
